Related papers: Evidence of localized groundwater flow during ther…
Closed-loop shallow geothermal systems are one of the key technologies for decarbonizing the residential heating and cooling sector. The primary type of these systems involves vertical borehole heat exchangers (BHEs). During the planning…
An accurate design of a ground-coupled heat pump system requires the knowledge of the outlet fluid temperature from the borehole heat exchangers (BHEs), both in the short and long term. This paper fucuses on the short and medium term. In…
Enhanced geothermal systems (EGS) involve strongly coupled, advection-dominated flow and heat transfer in fractured porous media. Conventional models typically assume local thermal equilibrium with a single effective fluid temperature or,…
The design and the simulation of a borehole-heat-exchanger (BHE) field is usually performed by simplified methods that yield either an overestimation or an underestimation of the thermal response. The methods employing the assumption of a…
Medium-deep geothermal energy is a key renewable source, but existing coaxial downhole heat exchanger (DHE) systems suffer from low efficiency and temperature decay. This study evaluates the impacts of circulating flow rate, inlet…
Predicting and interpreting thermal performance under oscillating flow in porous structures remains a critical challenge due to the complex coupling between fluid dynamics and geometric features. This study introduces a data-driven…
We present results on the global and local characterisation of heat transport in homogeneous bubbly flow. Experimental measurements were performed with and without the injection of $\sim 2.5$ mm diameter bubbles (corresponding to $Re_b…
Distributed temperature sensors (DTS) measure temperatures by means of optical fibers. Those optoelectronic devices provide a continuous profile of the temperature distribution along the cable. Initiated in the 1980s, DTS systems have…
A new vertical water tunnel with global temperature control and the possibility for bubble and local heat & mass injection has been designed and constructed. The new facility offers the possibility to accurately study heat and mass transfer…
Monitoring bottom-hole variables in petroleum wells is essential for production optimization, safety, and emissions reduction. Permanent Downhole Gauges (PDGs) provide real-time pressure data but face reliability and cost issues. We propose…
In situ thermal transport measurement of flowing fluid could be useful for the characterization and diagnosis of practical thermal systems such as fluid heat exchangers and thermal energy storage systems. Despite abundant reports on the…
We investigate the evolution of differential emission measure distribution (DEM[T]) in various phases of a B8.3 flare, which occurred on July 04, 2009. We analyze the soft X-ray (SXR) emission in 1.6-8.0 keV range, recorded collectively by…
Here we summarize the results from our direct numerical simulations (DNS) and experimental measurements on rotating Rayleigh-B\'enard (RB) convection. Our experiments and simulations are performed in cylindrical samples with an aspect ratio…
An enhanced geothermal system (EGS) expands the potential of geothermal energy by enabling the exploitation of regions that lack conventional hydrothermal resources. The EGS subsurface system is created by engineering enhanced flow paths…
The use of Earth-Air-Water Heat Exchangers (EAWHE) for sustainable air conditioning has not been widely studied. Due to their experimental nature, methods of characterizing internal thermal air distribution impose high dependence on…
In this study, analysis of shell and tube heat exchanger (HE) is performed. Theory part on heat transfer, calculation of heat exchanger and general thermal and hydrological properties are described. Several models are developed and computed…
In Paris Basin, we evaluate how HTEM data complement the usual borehole, geological and deep seismic data used for modelling aquifer geometries. With these traditional data, depths between ca. 50 to 300m are often relatively…
We present a novel geothermal exploration approach that integrates innovations at three spatial scale. At the regional scale (~100 km) we create LCOE heat maps using a techno-economic and metamodel analysis. This allows us to choose several…
This study compares different methods to predict the simultaneous effects of conductive and radiative heat transfer in a Polymethylmethacrylate (PMMA) sample. PMMA is a kind of polymer utilized in various sensors and actuator devices.…
Modern methods of environmental monitoring are deficient in the lack of ability to take measurements of energy flows since traditional readings involve capturing parameters such as temperature, pressure, and humidity without considering…