Related papers: Defect detection in III-V multijunction solar cell…
The growth of heavily doped tunnel junctions in inverted metamorphic multijunction solar cells induces a strong diffusion of Zn via a point-defects-assisted mechanism. The redistribution of Zn can compensate the n-type doping in the emitter…
A temperature accelerated life test on Upright Metamorphic Ga0.37In0.63P/Ga0.83In0.17As/Ge triple-junction solar cells has been carried out. The acceleration has been accomplished by subjecting the solar cells to temperatures (125, 145 and…
Reducing the formation of cracks during growth of GaInP/GaInAs/Ge 3-junction solar cells on Ge|Si virtual substrates has been attempted by thinning the structure, namely the Ge bottom cell and the GaInAs middle cell. The theoretical…
Solar cells manufactured on top of Ge substrates suffer from inherent drawbacks that hinder or limit their potential. The most deleterious ones are heavy weight, high bulk recombination, lack of photon confinement and an increase of the…
Here we present the experimental results of an inverted three-terminal heterojunction bipolar transistor solar cell (HBTSC) made of GaInP/GaAs. The inverted growth and processing enable contacting the intermediate layer (base) from the…
III-V materials show a wide range of gaps making them ideal for the design of high efficiency solar cells. This chapter reviews relevant growth methods and material properties of these materials and discusses methods of combining…
The investigation of the degradation effects on triple-junction (TJ) solar cells, operating in space environment, is of primary importance in view of future space missions towards harsh radiation orbits (e.g. MEO with high particle…
Solar energy is rapidly becoming a robust renewable energy source to conventional finite resources such as fossil fuels. It is harvested using interconnected photovoltaic panels, typically built with crystalline silicon cells, i.e.…
In this article, we investigate the effect of prolonged light exposure on silicon heterojunction solar cells. We show that, although light exposure systematicallyimproves solar cell efficiency in the case of devices using intrinsic and…
Previous studies of reverse-bias stability in perovskite solar cells have focused primarily on voltage controlled reverse-bias tests. Here we instead present an investigation of perovskite solar cell degradation under well-defined, constant…
A tandem GaAsP/SiGe solar cell has been developed employing group-IV reverse buffer layers grown on silicon substrates with a subsurface porous layer. Reverse buffer layers facilitate a reduction in the threading dislocation density with…
Energetic disorder has been known for decades to limit the performance of structurally disordered semiconductors such as amorphous silicon and organic semiconductors. However, in the past years, high performance organic solar cells have…
Multijunction solar cell design is guided by both the theoretical optimal bandgap combination as well as the realistic limitations to materials with these bandgaps. For instance, triple-junction III-V multijunction solar cells commonly use…
Tellurium allows attaining heavy n-type doping levels in GaAs, which is suited to achieve very low contact resistivities in solar cells. Besides, it modifies the energy bandgap of MOVPE-grown GaInP by reducing the group-III sublattice…
Structural defects, particularly grain boundaries, play a crucial role in governing charge transport and the optoelectronic properties of metal halide perovskites, thereby limiting the performance of devices. Solar cells incorporating…
Electric coupling between subcells of a monolithically grown multijunction solar cell in short circuit allows their simultaneous and independent characterization by means of photo- and electroreflectance. The photovoltage generated by…
Multijunction solar cells are usually grown on Ge substrates. This implies several disadvantages that hinder the performance of the whole multijunction and limit their possible applications. The drawbacks caused by the substrate are:…
Space solar cell radiation hardness is of fundamental importance in view of the future missions towards harsh radiation environment (like the Jupiter missions) and for the new spacecraft using Electrical Propulsion. In this paper we report…
Zinc-diffusion can induce multiple failures in the electrical performance of a multijunction solar cell. In this work, we show an important Zn-diffusion from the AlGaInP back-surface-field layer to the emitter of the GaInP top cell of an…
The investigation of solar cells degradation and the prediction of its end-of-life performance is of primary importance in the preparation of a space mission. In the present work, we investigate the reduction of solar-cells' maximum power…