Related papers: A new emitter for electrospray and electrohydrodyn…
Positive streamers in ambient air at pressures from 0.013 to 1 bar are investigated experimentally. The voltage applied to the anode needle ranges from 5 to 45 kV, the discharge gap from 1 to 16 cm. Using a "slow" voltage rise time of 100…
Additive microfabrication processes based on localized electroplating enable the one-step deposition of micro-scale metal structures with outstanding performance, e.g. high electrical conductivity and mechanical strength. They are therefore…
Buoyancy effects and nozzle geometry can have a significant impact on turbulent jet dispersion. This work was motivated by applications involving hydrogen. Using helium as an experimental proxy, buoyant horizontal jets issuing from a round…
Discharging a liquid from a nozzle at sufficient large velocity leads to a continuous jet that due to capillary forces breaks up into droplets. Here we investigate the formation of microdroplets from the breakup of micron-sized jets with…
Integrated micro-nanochannel networks in fluidic devices are desirable in a number of applications ranging from self-healing/cooling materials to bioengineering. The conventional micro-manufacturing techniques are capable of either…
Traditionally, circular orifices have been used for generating aerosols, however in recent times non-circular orifices are being considered due to their superior atomization and mixing features. In this work, we experimentally investigate…
Nanodroplets residing near wedges or edges of solid substrates exhibit a disjoining pressure induced dynamics. Our nanoscale hydrodynamic calculations reveal that non-volatile droplets are attracted or repelled from edges or wedges…
Instabilities in thin elastic sheets, such as wrinkles, are of broad interest both from a fundamental viewpoint and also because of their potential for engineering applications. Nematic liquid crystal elastomers offer a new form of control…
We report the controlled injection of near-isolated micron-sized liquid droplets into a low temperature He-Ne steady-state rf plasma at atmospheric pressure. The H2O droplet stream is constrained within a 2 mm diameter quartz tube. Imaging…
It was recently shown theoretically that it is possible to pull a spherical dielectric body towards the source of a laser beam [Nature Photonics {\bf 5}, 531 (2011)], a result with immediate consequences to optical manipulation of small…
Nanoscale potential wells provide a powerful means to engineer energy landscapes in low dimensional materials, enabling control over quantum states, carrier dynamics, and optoelectronic responses. Such confinement governs phenomena…
An experiment is conducted to investigate the effects of chevrons on installed subsonic jet noise at a Mach number of 0.5 using the NASA SMC000 (round) and SMC006 (chevron) nozzles. The jets are of a diameter D=16.93 mm and placed near a…
Laser flash melting and revitrification experiments have recently improved the time resolution of cryo-electron microscopy (cryo-EM) to the microsecond timescale, making it fast enough to observe many of the protein motions that are…
A new search for a permanent electric dipole moment (EDM) of the neutron is underway using ultracold neutrons produced and held in a bath of superfluid helium. Attaining the target sensitivity requires maintaining an electric field of…
Numerical solutions of high-speed microdroplet impact onto a smooth solid surface are computed, using the interFoam VoF solver of the OpenFOAM CFD package. Toward the solid surface, the liquid microdroplet is moving with an impinging gas…
This paper describes a lattice Boltzmann-based binary fluid model for inkjet printing. In this model, a time-dependent driving force is applied to actuate the droplet ejection. As a result, the actuation can be accurately controlled by…
Fluid flows hosting electrical phenomena make the subject of a fascinating and highly interdisciplinary scientific field. In recent years, the extraordinary success of electrospinning and solution blowing technologies for the generation of…
Dewetting of ultrathin (< 100 nm) polymer films, by heating above the glass transition, produces droplets of sizes of the order of microns and mean separations between droplets of the order of tens of microns. These relatively large length…
Flexible transparent electrodes, encompassing the combination of optical transparency and electrical conductivity, empower numerous optoelectronic applications. While the main efforts nowadays concentrate on developing wire meshes and…
One of the harmful contaminants in the atmosphere, which negatively affects the well-being of both humans and animals, is the suspended respirable particles. The most difficult aspect of the study is now removing these fine respirable…