Related papers: RIO EPICS device support application case study on…
The Advanced Photon Source is now in its fifth year of routine beam production. The EPICS-based [1] control system has entered the phase in its life cycle where new control algorithms must be implemented under increasingly stringent…
In order to carry out inelastic X-ray scattering (IXS) experiment at BL15U1 beamline of Shanghai Synchrotron Radiation Facility (SSRF), the data acquisition and control system based on SPEC software has been developed. The IXS experimental…
The AEgIS experiment at CERN recently decided to adopt a control system solution based on the Sinara/ARTIQ open hardware and software infrastructure. This decision meant to depart from the previously used paradigm of custom-made electronics…
This paper introduces a high-performance Soft-Core Processor based data acquisition system designed for handling Resistive Plate Chambers (RPCs). The DAQ consist of FPGA-based hardware equipped with Soft-Core Processor and embedded…
The kinetic analyses are quite important when it comes to understand the particle behavior in any device as they start to deviate from continuum nature. In the present study, kinetic simulations are performed using Particle-in-Cell (PIC)…
We will use EPICS toolkit [1] to build a prototype for upgrading BEPC control system. The purposes are for the following three aspects: (1) Setup a network based distributed control system with EPICS. (2) Study some front-end control…
At the High Energy Photon Source (HEPS) where up to 90 beamlines can be provided in the future, minimisation of workload for individual beamlines and maximisation of knowledge about one beamline that can be applied to other beamlines is…
For an unattended telescopes in Antarctic, the remote operation, autonomous observation and control are essential. An EPICS (Experimental Physics and Industrial Control System) and RTS2(Remote Telescope System, 2nd Version) based autonomous…
The European Spallation Source (ESS) in Lund, Sweden is just entering the construction phase with 3 neutron instruments having started in its design concept phase in 2014. As a collaboration of 17 European countries the majority of hardware…
The injection control system of Hefei Light Source (HLS) storage ring is a subsystem of the upgraded HLS control system, which is based upon EPICS. Three programmable logic controllers (PLCs) are used as device controllers, which control…
The EPICS based control system of the ISAC radioactive beam facility uses the CapFast schematic editor to construct the IOC function-block databases. This allows a self-documenting graphical representation of the IOC software using a…
Electrochemical Impedance Spectroscopy (EIS) is an experimental technique largely used in electrochemistry and corrosion studies. However, almost all published papers have just measured the EIS at the corrosion potential, especially for…
Important features of Electron Cyclotron Resonance Ion Source (ECRIS) operation are accurately reproduced with a numerical code. The code uses the particle-in-cell technique to model a dynamics of ions in ECRIS plasma. It is shown that gas…
Energy-constrained sensor nodes can adaptively optimize their energy consumption if a continuous measurement exists. This is of particular importance in scenarios of high dynamics such as energy harvesting or adaptive task scheduling.…
RFID systems are among the major infrastructures of the Internet of Things, which follow ISO and EPC standards. In addition, ISO standard constitutes the main layers of supply chain, and many RFID systems benefit from ISO standard for…
Modern cloud computing systems distribute software executables over a network to keep the software sources, which are typically compiled in a security-critical cluster, secret. We develop ERIC, a new, efficient, and general software…
PIP-II is an 800 MeV superconducting RF linear accelerator under development at Fermilab. As the new first stage in our accelerator chain, it will deliver high-power beam to multiple experiments simultaneously and thus drive Fermilab's…
The Material Plasma Exposure eXperiment (MPEX) is a steady state linear device with the goal to perform plasma material interaction (PMI) studies at future fusion reactor relevant conditions. A prototype of MPEX referred as Porto-MPEX is…
With the advent of readily available wireless communications and small hand-held computers, commonly known as personal digital assistants (PDAs), it is interesting to consider using these portable devices to access a control system. We have…
The Integrated Computer Control System (ICCS) for the National Ignition Facility (NIF) is a layered architecture of 300 front-end processors (FEP) coordinated by supervisor subsystems including automatic beam alignment and wavefront…