Related papers: Stress-induced phase transformations in Ti-15Mo al…
Dielectric permittivity was studied in ceramics of relaxor ferroelectric bismuth-sodium titanate Na$_{0.5}$Bi$_{0.5}$TiO$_{3}$. The measurements were performed on as sintered and heat treated in vacuum samples. The diffuse dielectric…
Molecular dynamics simulations are performed to examine the dynamic response of amorphous solids to oscillatory shear at finite temperatures. The data were collected from a poorly annealed binary glass, which was deformed periodically in…
A study is presented of the structural changes occurring as a function of the annealing conditions in hydrogenated amorphous Si/Ge multilayers prepared by sputtering. Annealing changes the structure of the as-deposited multilayer except for…
We investigate the crystallization of crosslinked and entangled polymers under external deformation using a coarse-grained poly(vinyl alcohol) (CG-PVA) model and molecular dynamics simulations. Following uniaxial deformation, the systems…
The cyclic deformation behavior of extruded Mg-8.5wt.%Al alloy with a conventional extrusion texture and a modified texture is systematically investigated by in-situ neutron diffraction and elastic viscoplastic self-consistent (EVPSC)…
We show that a flat two dimensional network of connected vertices, when stretched, may deform plastically by producing `pleats'; system spanning linear structures with width comparable to the lattice spacing, where the network overlaps on…
Large-scale molecular dynamics simulations of shear deformation under constant pressures of amorphous silicon, PT from low-density-amorphous (LDA) to high-density-amorphous (HDA) Si, and formation of shear bands (SBs) are performed using…
The ability to control the stress-induced phase transformation of the shape memory alloy, NiTi, is an important technological challenge that must be understood for their wide application in devices that can exploit their reversible strain…
Pressure-induced phase transformations (PTs) between numerous phases of Si, the most important electronic material, have been studied for decades. This is not the case for plastic strain-induced PTs. Here, we revealed in-situ various…
The adiabatic temperature change DTad of a Mn1.3Fe0.7P0.5Si0.55 Fe2P-type alloy was measured under different magnetic field-sweep rates from 0.93 Ts-1 to 2870 Ts-1. We find a field-sweep-rate independent magnetocaloric effect due to a…
Our measured dielectric constant and mechanical response of multiferroic BiFeO3 indicate four phase transitions below room temperature. Features correlate with those reported at 50K (from a peak in the zero-field-cooled magnetic…
The yielding transition that occurs in amorphous solids under athermal quasistatic deformation has been the subject of many theoretical and computational studies. Here, we extend this analysis to include thermal effects at finite shear…
Phase transition from anatase to rutile for the 70nm TiO2 crystallite has been investigated by annealing at different temperatures followed by TDPAC measurement of these TiO2 crystallites adsorbed with 181Hf tracer. The width of the peaks…
Dislocation interactions at the crack nucleation site were investigated in near-alpha titanium alloy Ti-6242Si subjected to low cycle fatigue. Cyclic plastic strain in the alloy resulted in dislocation pile-ups in the primary alpha grains,…
Zinc alloys have emerged as promising candidates for biodegradable materials due to their remarkable biocompatibility and favorable mechanical characteristics. The incorporation of alloying elements plays an essential role in advancing the…
In this study, we achieved the improvement of uniaxial perpendicular magnetic anisotropy (PMA) in the W/MgAl2O4/CoFeMnSi/W/CoFeMnSi/MgAl2O4/W heterostructure by manipulating the annealing temperature (TA) [350 C, 450 C, and 550 C]. We…
Amorphous metallic foams are prospective materials due to unique combination of their mechanical and energy-absorption properties. In the present work, atomistic dynamics simulations are performed under isobaric conditions with the pressure…
High-dielectric-constant CaCu3Ti4O12 (CCTO) thin films were prepared on Pt/Ti/SiO2/Si(100) substrates by pulsed-laser deposition. The 480 nm thick polycrystalline films have preferred orientation and show obvious crystallization on the…
\textbf{Background}: Superallowed $0^+ \rightarrow 0^+$ $\beta$ decays of isospin $T=2$ nuclides can be used to test theoretical isospin symmetry breaking corrections applied to extract the CKM matrix element $V_{ud}$ from $T = 0,1$ decays…
Hot rolled commercial metastable austenitic steel 321 with strongly elongated thin delta-ferrite particles in its microstructure was the object of investigations. Ultrafine-grained (UFG) microstructure in steel 321 was formed by Equal…