Related papers: Stress-induced phase transformations in Ti-15Mo al…
Pressure-induced phase transformation occurs during silicon (Si) wafering processes. \b{eta}-tin (Si-II) phase is formed at high pressures, followed by the transformation to Si-XII, Si-III or/and amorphous Si ({\alpha}-Si) phases during the…
Four series of tensile loading-unloading tests are performed on isotactic polypropylene in the sub-yield domain of deformations at room temperature. In the first series, injection-molded specimens are used as produced, whereas in the other…
The ferromagnetic {\alpha}-MnBi phase as non-rare earth magnetic material has gained increasing interest, but fabrication of large volumes containing a significant amount of {\alpha}-MnBi is still challenging. Targeting successful…
The mechanical properties and microstructural evolution of a medium-entropy alloy Co$_{17.5}$Cr$_{12.5}$Fe$_{55}$Ni$_{10}$Mo$_{5}$ (at%) in a low temperature range (including the record low temperatures region down to 0.5 K) were…
We synthezised an AlZnMgCu alloy through mechanical alloying and, using Xray diffraction (XRD), identified the formation of the eta prime phase after 40 hours of grinding. Using reaction-free isoconversion theory, we determined that this…
Under hydrostatic pressure, alpha-quartz undergoes solid-state mechanical amorphization wherein the interpenetration of SiO4 tetrahedra occurs and the material loses crystallinity. This phase transformation requires a high hydrostatic…
The effect of tensile stress applied during cooling of binary glasses on the potential energy states and mechanical properties is investigated using molecular dynamics simulations. We study the three-dimensional binary mixture that was…
Despite the significant application potential of laser powder bed fusion (L-PBF) processed Ti-6Al-4V components, a detailed understanding of their deformation mechanisms remains limited. This study investigates the deformation behavior of…
Ageing mechanisms of the U-7\%wtNb alloy have been investigated on samples exposed to temperatures of 150$^{o}$C for up to 5000\,hours. A variety of surface and bulk analytic techniques have been used to investigate microstructural,…
Dynamics of thin films of poly(vinyl acetate) (PVAc) and poly(methyl methacrylate) (PMMA) have been investigated by dielectric relaxation spectroscopy in the frequency range from 0.1Hz to 1MHz at temperatures from 263K to 423K. The…
We observed an unexpected bending of a horizontally held palladium plate at 150$^{\circ}$C under a small external shearing stress. The deformation was fastest at the nominal composition of PdH$_{{\rm 0.1-0.2}}$, which is in the…
The effect of pre-ageing deformation on the size and distribution of beta-prime precipitates and subsequently on the resulting strength and ductility have been measured in a Mg-3.0at.%Zn-0.5at.%Y alloy. The alloy was extruded and then…
The microscopic model of semi-crystalline polymer in high-elastic state is proposed. The model is based on the assumption that, below the melting temperature, the semi-crystalline polymer comprises crystal nuclei connected by stretched…
Heavy plastic shear deformation at relatively low homologous temperatures is called high-pressure torsion (HPT) deformation, which is one method of severe plastic deformation (SPD). The aim of the paper is to give an overview of a new…
Ageing mechanisms of the U-5\,\%wtNb system have been investigated on samples exposed to temperatures of 150$\,^{\circ}$C for up to 5000\,hours. A variety of surface and bulk analytic techniques have been used to investigate phase, chemical…
A new $\beta$-metastable Ti-alloy is designed with the aim to obtain a TWIP alloy but positioned at the limit between the TRIP/TWIP and the TWIP dominated regime. The designed alloy exhibits a large ductility combined with an elevated and…
The inherent existence of multi phases in iron oxide nanostructures highlights the significance of them being investigated deliberately to understand and possibly control the phases. Here, the effects of annealing at 250 0C with a variable…
Phase transitions in metastable $\alpha$-, $\kappa(\epsilon)$-, and $\gamma$-Ga$_2$O$_3$ films to thermodynamically stable $\beta$-Ga$_2$O$_3$ during annealing in air, N$_2$, and vacuum have been systematically investigated via in-situ…
Various phenomena (phase transformations, chemical reactions, and friction) under high pressures in diamond anvil cell are strongly affected by fields of all components of stress and plastic strain tensors. However, they could not be…
The microstructure of Mg-Al-Ca alloys consists of a hard intra- and intergranular eutectic Laves phase network embedded in a soft $\alpha$-Mg matrix. For such heterogeneous microstructures, the mechanical response and co-deformation of both…