Related papers: Stress-induced phase transformations in Ti-15Mo al…
The thermal decomposition behavior, the microstructural evolution and its influence on the mechanical properties of a supersaturated Cu Co solid solution with ~100 nm average grain size prepared by severe plastic deformation is investigated…
We consider the process of precipitation in binary alloys in the presence of mechanical deformation. It is commonly observed that mechanical deformation prior to or during precipitation leads to microstructure with excess defects, which…
The overall solid-to-solid phase transformation kinetics under non-isothermal conditions has been modeled by means of a differential equation method. The method requires provisions for expressions of the fraction of the transformed phase in…
Additive manufacturing of Ti-6Al-4V alloy via laser powder-bed fusion leads to non-equilibrium $\alpha'$ martensitic microstructures, with high strength but poor ductility and toughness. These properties may be modified by heat treatments,…
Transformations in bcc-$\beta$, hcp-$\alpha$, and the $\omega$ phases of Ti alloys are studied using Density Functional Theory for pure Ti and Ti alloyed with Al, Si, V, Cr, Fe, Cu, Nb, Mo, and Sn. The $\beta$-stabilization caused by…
Poly(ethylene terephthalate) (PET) is a semi--crystalline polymer that can be crystallized to different degrees heating from the amorphous state. Even when primary crystallization has been completed, secondary crystallization can take place…
Aiming at increasing the yield strength of transformation and twinning induced plasticity (TRIP and TWIP) titanium alloys, a dual-phase $\alpha$/$\beta$ alloy is designed and studied. The composition Ti 7Cr 1.5Sn (wt.%) is proposed, based…
We demonstrate that plastic deformation in solids is associated with a dynamic transition that is reminiscent to the transition from a superconducting to a mixed phase in Type II superconductors. We report analytic calculations, extensive…
SrAl2Si2 crystallizes into either a semimetallic, CaAl2Si2-type, \alpha phase or a superconducting, BaZn2P2-type, \beta phase. We explore possible \alpha --Pc;Tc--> \beta transformations by employing pressure- and temperature-dependent…
In large area micro hot embossing, the process temperature plays a critical role to both the local fidelity of microstructure formation and global uniformity. The significance of low temperature hot embossing is to improve global flatness…
We have carried out plastic deformation experiments on single-phase samples of the body centered ZrNbTiVHf high-entropy alloy between room temperature and 1150 K. The experiments were carried out on polycrystalline samples with two…
Diblock copolymers by virtue of the chemical dissimilarity between the constituting blocks exhibit microphase separation in the melt state. The phase separated melt can successfully be exploited to control the morphology of the final semi…
A FePd alloy was nanostructured by severe plastic deformation following two different routes: ordered and disordered states were processed by high pressure torsion (HPT). A grain size in a range of 50 to 150 nm is obtained in both cases.…
Physical vapor deposition can prepare organic glasses with high kinetic stability. When heated, these glassy solids slowly transform into the supercooled liquid in a process known as rejuvenation. In this study, we anneal vapor-deposited…
A high-intensity proton beam exposure with 181 MeV energy has been conducted at Brookhaven Linac Isotope Producer facility on various material specimens for accelerator targetry applications, including titanium alloys as a beam window…
The influence of the physical mechanisms activated during deformation and annealing on the microstructure and texture evolution as well as on the mechanical properties in the equiatomic CoCrFeMnNi high-entropy alloy (HEA) were investigated.…
The rapid degradation of the functional properties of many Ti-based alloys is due to the precipitation of the $\omega$ phase. In the conventional high-temperature shape memory alloy Ti-Ta the formation of this phase compromises completely…
The behavior of $\alpha$-quartz under hydrostatic and non-hydrostatic high-pressure conditions has been investigated in Molecular Dynamics simulations of silica in order to clarify the role of non-hydrostatic stresses in the amorphization…
Annealing treatment is an important step of rolling deformation that contributes to microstructural evolution and leads to the significant changes in damping capacity. Damping capacities were analyzed in the parallel to rolling direction at…
We investigated the behavior of lead titanate (PbTiO3) up to 100 GPa, both at room temperature and upon laser heating, using synchrotron X ray diffraction combined with density functional theory (DFT) computations. At the high pressure…