Related papers: Study of delamination in REBCO coated conductor by…

The REBCO coated conductor has the potential to be widely used in ultrahigh field magnets. It is well known, however, that it is not mechanically strong against delamination in the direction normal to its surface due to its intrinsic…

REBCO tape has successfully used in ultra-high field magnets. Mechanically, it is very strong in its length direction but is prone to delamination in the thickness direction. In an epoxy impregnated REBCO magnet, thermal strain alone could…

REBCO coated conductor has great potential to be used in ultra-high field magnets. Commercial REBCO tapes are strong in the longitudinal direction but prone to delamination by tensile stress in the thickness direction. For high field magnet…

Rare-Earth Barium Copper Oxide (REBCO) coated conductors are an attractive option for application in high field accelerator magnets due to their high critical field and the convenience of fabrication without heat treatment compared to some…

Rare Earth Barium Copper Oxide (REBCO) coated conductors (CCs) have emerged for future high field magnets in fields and temperatures inaccessible for Nb based superconductors. However, their exceptionally high current densities pose…

Rare-earth-barium-copper-oxide (REBCO) tapes are now available from several industrial manufacturers and are very promising conductors in high field applications. Due to diverging materials and deposition processes, these manufacturers'…

The residual low angle grain boundary (GB) network is still the most important current-limiting mechanism operating in bi-axially textured rare earth barium copper oxide (REBCO) coated conductors. While Ca-doping is well established to…

To explore the limits of layer wound (RE)Ba2Cu3O7-x (REBCO, RE = Rare Earth) coils in a high magnetic field environment > 30 T, a series of small insert coils have been built and characterized in background fields. One of the coils…

Rare earth barium copper oxide (REBCO) coated conductor has emerged as one of the high Tc superconductors suitable for future ultrahigh field superconducting magnet applications. In the design and fabrication of such ultrahigh field REBCO…

REBCO coated conductor is a high temperature superconductor that has a wide range of applications, one of which is the current leads of magnet systems. In the design of current leads, it is crucial to minimize their thermal conduction while…

The use of REBCO coated conductors is envisaged for many applications, extending from power cables to high-field magnets. Whatever the case, thermal properties of REBCO tapes play a key role for the stability of superconducting devices. In…

High temperature superconducting coated conductor (CC) could be practically applied in electric equipment due to its favorable mechanical properties and the critical current performance of YBCO superconducting layer. It is well known that…

We have measured the transport properties of a series of underdoped YBa2Cu3O7 nanowires fabricated with widths of 100-250 nm. We observe large telegraph-like fluctuations in the resistance between the pseudogap temperature T* and the…

Probing the dynamics of superconducting transitions induced by strong electromagnetic fields is vital to designing high power devices leveraging these materials. The development of high temperature superconductors (HTS) is particularly…

In a no-insulation (NI) REBCO magnet, the turn-to-turn contact resistivity (Rc) determines its quench self-protection capability, charging delay time and the energy loss during field ramps. Therefore it is critically important to be able to…

Scaling relations describing the electromagnetic behaviour of coated conductors (CCs) greatly simplify the design of REBCO-based devices. The performance of REBCO CCs is strongly influenced by fabrication route, conductor architecture and…

Electron beam-induced current (EBIC) imaging in the scanning transmission electron microscope (STEM), STEM-EBIC, provides direct access to carrier transport at the nanoscale. While well established in bulk SEM geometries, its application to…

Transparent conductive oxides (TCO) enable confinement of charge-sensitive ions and Rydberg atoms proximal to dielectric structures including waveguides and photon detectors. However, optical loss precludes the use of TCOs within…

We report the data on magnetization losses and critical current of multifilament copper stabilized coated conductors. Eight centimeters long samples of copper stabilized YBa2Cu3O7-x (YBCO) coated conductors manufactured commercially were…

Over the past few years, ionic conductors have gained a lot of attention given the possibility to implement them in various applications such as supercapacitors, batteries or fuel cells as well as for resistive memories. Especially, layered…