Related papers: Improved Dynamic Response in Grid-Forming Converte…
The widely accepted definition of grid-forming (GFM) inverter states that it should behave as a (nearly) constant voltage source behind an impedance by maintaining a (nearly) constant internal voltage phasor in the sub-transient to…
Grid-following (GFL) inverters are commonly used for integrating renewable energy sources into power grids. However, the dynamic performance of GFL models can be significantly impacted by the Phase-Locked Loop (PLL) in a weak grid, leading…
This paper develops a hybrid system modeling framework for inverters that switch between grid-following and grid-forming control schemes. In particular, such inverters are modeled as hybrid automata with guard conditions on voltage and…
Ground fault detection in inverter-based microgrid (IBM) systems is challenging, particularly in a real-time setting, as the fault current deviates slightly from the nominal value. This difficulty is reinforced when there are partially…
This paper studies control interactions between grid-forming (GFM) converters exhibited by power and frequency oscillations in a weakly connected offshore wind power plant (WPP). Two GFM controls are considered, namely virtual synchronous…
A multi-input multi-output based grid-forming (MIMO-GFM) converter has been proposed using multivariable feedback control, which has been proven as a superior and robust system using low-order controllers. However, the original MIMO-GFM…
Power electronic converters for integrating renewable energy resources into power systems can be divided into grid-forming and grid-following inverters. They possess certain similarities, but several important differences, which means that…
This paper presents current control method for a grid-connected partial resonant soft switching inverter. This inverter does not use an electrolytic capacitor and is capable of boosting and bucking the voltage. Grid-connected inverters are…
This paper presents a novel strategy for the synchronization of grid-following Voltage Source Converters (VSCs) in power systems with low rotational inertia. The proposed synchronization unit is based on emulating the physical properties of…
With the emergence of low-inertia microgrids powered by inverter-based generation, there remains a concern about the operational resilience of these systems. Grid-forming inverters (GFMs), enabled by various device-level (primary) and…
With the increasing interest in converter-fed islanded microgrids, particularly for resilience, it is becoming more critical to understand the dynamical behavior of these systems. This paper takes a holistic view of grid-forming converters…
There has been widespread global increasing use of renewable energy sources, which are usually connected to the electricity grids via power electronic inverters. Traditionally, these inverter-based resources operate in either grid-forming…
This paper proposes a gray-box stability analysis mechanism based on data-driven dynamic mode decomposition (DMD) for commercial grid-tied power electronics converters with limited information on its control parameters and topology. By…
The large-scale integration of inverter-interfaced renewable energy sources presents significant challenges to maintaining power balance and nominal frequency in modern power systems. This paper studies grid-level coordinated control of…
A unified virtual oscillator controller (uVOC) is proposed, which enables a unified analysis, design, and implementation framework for both grid-forming (GFM) and grid-following (GFL) voltage source converters (VSCs). Oscillator based GFM…
Grid-forming voltage source converter (GF-VSC) has been identified as the key technology for the operation of future converter-dominated power systems. Among many other issues, transient stability of this type of power systems remains an…
Integration of renewable resources is profoundly reshaping the dynamics of modern power systems. This study shows that the voltage dynamics of power systems with multiple grid-forming (GFM) converters often enjoys a desirable property…
Grid-forming (GFM) converter is deemed as one enabler for high penetration of renewable energy resources in power system. However, as will be pointed out in this letter, the conventional power-to-frequency (P-f) GFM control will face a…
Hybrid microgrids integrating Grid-Following (GFL) and Grid-Forming (GFM) inverters present complex control challenges arising from the decoupling between long-term economic dispatch and real-time dynamic regulation, as well as the distinct…
This paper investigates the transient stability of power systems co-dominated by different types of grid-forming (GFM) devices. Synchronous generators (SGs and VSGs) and droop-controlled inverters are typical GFM devices in modern power…