Related papers: Strain rate sensitivity of a Cu/Al$_2$O$_3$ multi-…
Pulsed laser deposition from a Nd:YAG laser was employed in production of hundreds of nanometer thick quasicrystalline Ti-Zr-Ni films on glass substrate. The influence of deposition temperature Ts on the structure, morphology and…
The study of the high strain rate mechanical behaviour of materials using micropillar compression tests has been hindered so far due to the lack of suitable instrumentation. In the present study, a novel high strain rate micropillar…
$V_2O_3$ has long been studied as a prototypical strongly correlated material. The difficulty in obtaining clean, well ordered surfaces, however, hindered the use of surface sensitive techniques to study its electronic structure. Here we…
A systematic investigation has been performed to optimize the microstructure of $\mathrm{L1_0-FePt-SiO_x}$ granular thin film as recording media for heat-assisted magnetic recording. The FePt-BN nucleation layer, which is stable even at…
Specific heat of polycrystalline BaTiO3 thin films on the fused quartz substrate was measured by ac-hot probe method. Phase transition temperature, excess entropy and spontaneous polarization were determined as a function of film thickness…
Chromium thin films deposited on silicon substrates by DC magnetron sputtering were systematically investigated as a function of film thickness, using a DC power of 50 W and a post-deposition annealing temperature of 200 C. Two types of…
Al$_x$Sc$_{1-x}$ thin films have been studied with compositions around Al$_3$Sc ($x$ = 0.75) for potential interconnect metallization applications. As-deposited 25 nm thick films were x-ray amorphous but crystallized at 190{\deg}C, followed…
This paper presents progress towards the large-scale manufacturability of piezo- and ferroelectric Al$_{1-x}$Sc$_x$N thin films with very high Sc content. Al$_{0.6}$Sc$_{0.4}$N layers were deposited by reactive sputtering from a 300 mm…
Copper oxide thin films are deposited on quartz substrates by DC magnetron sputtering and the effect of deposition temperature on their optoelectronic properties is examined in detail. Scanning Electron Microscopy (SEM), X-ray diffraction…
We have investigated the magnetic-field-induced phase transition of charge-ordered (CO) Pr$_{0.5}$Ca$_{0.5}$MnO$_3$ thin films, deposited onto (100)-oriented LaAlO$_3$ and (100)-oriented SrTiO$_3$ substrates using the pulsed laser…
BiFeO3 thin films have been grown on Pt/Ti/SiO2/Si substrates with pulsed laser deposition using Au as the top electrode. The resistive switching property of the Au/BiFeO3/Pt stack has been significantly improved by carefully tuning the…
We investigate the strain-rate-dependent mechanical behavior and deformation mechanisms of a refractory high entropy alloy, Ti29Zr24Nb23Hf24 (at.%), with a single-phase body-centered cubic (BCC) structure. High-temperature compression tests…
We report on an XPS study of AlN thin films grown on Si(100) substrates by ion beam sputter deposition (IBSD) in reactive assistance of N+/N2+ ions to unravel the compositional variation of their surface when deposited at different…
Nanocrystals of indium oxide (In$_2$O$_3$) with sizes below 10 nm were prepared in alumina matrixes by using a co-pulverization method. The used substrates such as borosilicate glasses or (100) silicon as well as the substrate temperatures…
Samples of $\alpha$-SiC have been sintered with liquid phase (LPS) to 1950 $^\circ$C, in atmosphere of argon and processing times between 1 and 7 hours. Using scanning electron microscopy (SEM) the microstructure of the samples has been…
Transport properties of the good thermoelectric misfit oxide Ca$_3$Co$_4$O$_9$ are examined. In-plane resistivity and Hall resistance measurements were made on epitaxial thin films which were grown on {\it c}-cut sapphire substrates using…
Pb-free ferroelectric thin films are gaining attention due to their applicability in memory, sensor, actuator, and microelectromechanical system. In this work, Na$_{0.4}$K$_{0.1}$Bi$_{0.5}$TiO$_3$ (NKBT0.1) ferroelectric thin films were…
Plastic deformation of micron-scale crystalline materials differ considerably from bulk ones, because it is characterized by random strain bursts. To obtain a detailed picture about this stochastic phenomenon, micron sized pillars have been…
Severe plastic deformation changes the microstructure and properties of steels, which may be favourable for their use in structural components of nuclear reactors. In this study, high-pressure torsion (HPT) was used to refine the grain…
Mechanical testing of micropillars is a field that involves new physics, as the behaviour of materials is non-deterministic at this scale. To better understand their deformation mechanisms we applied 3-dimensional high angular resolution…