Related papers: Characterization of the RD50-MPW4 HV-CMOS pixel se…

The phase 1 upgrade of the CMS pixel detector has been designed to maintain the tracking performance at instantaneous luminosities of $2 \times 10^{34} \mathrm{~cm}^{-2} \mathrm{~s}^{-1}$. Both barrel and endcap disk systems now feature one…

Diamond quantum sensors are sensitive to weak microwave magnetic fields resonant to the spin transitions. However the spectral resolution in such protocols is limited ultimately by sensor lifetime. Here we demonstrate a heterodyne detection…

The performance of the CMS electromagnetic calorimeter upgraded readout electronics, developed for the High-Luminosity phase of the LHC, is discussed. Data collected in two beam test campaigns conducted in 2018 and 2021 at the H4 and H2…

We report on the realization of a high sensitivity RF noise measurement scheme to study small current fluctuations of mesoscopic systems at milliKelvin temperatures. The setup relies on the combination of an interferometric ampli- fication…

We present a scalable in-pixel processing architecture that can reduce the data throughput by 10X and consume less than 30 mW per megapixel at the imager frontend. Unlike the state-of-the-art (SOA) analog process-in-pixel (PIP) that…

The four-level heterodyne Rydberg atom receiver has garnered significant attention in microwave detection and communication due to its high sensitivity and phase measurement capabilities. Existing theoretical studies, primarily based on…

The Large Hadron Collider (LHC) experiments ATLAS and CMS have established hybrid pixel detectors as the instrument of choice for particle tracking and vertexing in high rate and radiation environments, as they operate close to the LHC…

Pixelated silicon detectors are state-of-the-art technology to achieve precise tracking and vertexing at collider experiments, designed to accurately measure the hit position of incoming particles in high rate and radiation environments.…

The ATLAS Collaboration will upgrade its semiconductor pixel tracking detector with a new Insertable B-layer (IBL) between the existing pixel detector and the vacuum pipe of the Large Hadron Collider. The extreme operating conditions at…

Few-layer molybdenum disulfide (FL-MoS$_2$) films have been integrated into amorphous silicon (a-Si:H) pin photodetectors. To achieve this, vertical a-Si:H photodiodes were grown by plasma-enhanced chemical vapor deposition (PE-CVD) on top…

The RD53 collaboration is currently designing a large scale prototype pixel readout chip in 65 nm CMOS technology for the phase 2 upgrades at the HL-LHC. The RD53A chip will be available by the end of the year 2017 and will be extensively…

The High Luminosity LHC (HL-LHC) phase is designed to increase by an order of magnitude the amount of data to be collected by the LHC experiments. The foreseen gradual increase of the instantaneous luminosity of up to more than twice its…

We present a unique application of OxRAM devices in CMOS Image Sensors (CIS) for dynamic range (DR) improvement. We propose a modified 3T-APS (Active Pixel Sensor) circuit that incorporates OxRAM in 1T-1R configuration. DR improvement is…

To meet the need for a high counting rate and high time resolution in future high-energy physics experiments, a prototype of a gas photodetector with an RPC structure was developed. Garfield++ simulated the detector's performance, and the…

The CMS muon system operates gas-based detectors. Upgrades of the detectors and trigger components are needed to cope with increasingly challenging conditions of the HL-LHC. New irradiation tests are performed to ensure that the muon…

The next generation of MAPS for future tracking detectors will have to meet stringent requirements placed on them. One such detector is the ALICE ITS3 that aims to be very light at 0.07% X/X$_{0}$ per layer and have a low power consumption…

In the construction of High-Luminosity Large Hadron Collider (HL-LHC) and Future Circular Collider (FCC) experiments, 3D pixel sensors have become indispensable components due to their superior radiation hardness, fast response, and low…

Recent advancements in particle physics demand pixel detectors that can withstand increased luminosity in the future collider experiments. In response, MALTA, a novel monolithic active pixel detector, has been developed with a cutting-edge…

To assess the viability of a shallow-depth neutrino detector, a Cosmic Muon Veto Detector (CMVD) is being constructed on top of the stack of Resistive Plate Chamber (RPC) detectors at TIFR, Mumbai. The CMVD employs extruded plastic…

A semiconductor tracker for muon scattering tomography is presented. The tracker contains silicon strip sensors with an $80\,\mu$m pitch, precision mechanics and integrated cooling. The electronic readout of the sensors is performed by a…