Related papers: Numerical Investigation of Optimal Buffer Layer an…

This work investigates the effect of a scandium nitride buffer layer on the superconducting properties of niobium nitride thin films. The use of a ScN buffer layer significantly improves the characteristics of 29 nm thick NbN films: the…

We carried out simulative investigations on a non-toxic, lead-free perovskite solar cell (PSC), where Cs2AgBiBr6, P3HT, ZnO nanorod, and C were utilized as the absorber layer, hole transport layer, electron transport layer, and back…

We show that thin film CdTe solar cells exhibit the phenomenon of threshold switching similar to that in phase change and resistive memory. It creates a conductive filament (shunt) through the solar cell reaching the buried electrode, such…

A complex InAs/CdSe/ZnSe Core/Shell1/Shell2 (CSS) structure is synthesized, where the intermediate CdSe buffer layer decreases strain between the InAs core and the ZnSe outer shell. This structure leads to significantly improved…

Whether porosity can effectively improve thermoelectric performance is still an open question. Herein we report that thermoelectric performance can be significantly enhanced by creating porosity in n-type Mg3.225Mn0.025Sb1.5Bi0.49Te0.01,…

Carbon nitride two-dimensional (2D) materials are among the most attractive class of nanomaterials, with wide range of application prospects. As a continuous progress, most recently, two novel carbon nitride 2D lattices of C3N5 and C3N4…

Post-deposition CdCl$_2$ treatment of polycrystalline CdTe is known to increase photovoltaic efficiency. However, the precise chemical, structural, and electronic changes that underpin this improvement are still debated. In this study,…

We present evidence that band gap narrowing at the heterointerface may be a major cause of the large open circuit voltage deficit of Cu$_2$ZnSnS$_4$/CdS solar cells. Band gap narrowing is caused by surface states that extend the…

Cu2ZnSnS4 (CZTS) is a promising material as an absorber in photovoltaic applications. The measured efficiency, however, is far from the theoretically predicted value for the known CZTS phases. To improve the understanding of this…

Solar cells based on kesterite-type $Cu_2ZnSnS_4$ (CZTS) thin films were fabricated using a chemical route to prepare the $CZTS$ films, consisting in sequential deposition of $Cu_2SnS_3$ (CTS) and $ZnS$ thin films followed by annealing at…

In the last few years there is an unprecedented progress in the increase of the power conversion efficiency of perovskite solar cells. Evidently, further advances of the efficiency of these devices will depend on the constraints imposed by…

CsPbI3 has recently received tremendous attention as a possible absorber of perovskite solar cells (PSCs). However, CsPbI3-based PSCs have yet to achieve the high performance of the hybrid PSCs. In this work, we performed a density…

In this study, combined DFT, SCAPS-1D, and wxAMPS frameworks are used to investigate the optimized designs of Cs2BiAgI6 double perovskite-based solar cells. The first-principle calculation is employed to investigate the structural…

Perovskite solar cells (PSCs) with transparent electrodes can be integrated with existing solar panels in tandem configurations to increase the power conversion efficiency. A critical layer in semi-transparent PSCs is the inorganic buffer…

In this paper we conduct numerical simulation of CdS/CIGS solar cells by use of the AMPS-1D software aiming to formulate the optimal design of the new multi-junction tandem solar cell providing its most efficient operation. We start with…

The significant surge in energy use and escalating environmental concerns have sparked worldwide interest towards the study and implementation of solar cell technology. Perovskite solar cells (PSCs) have garnered remarkable attention as an…

A lead-free, completely inorganic, and non-toxic Cs2TiBr6-based double perovskite solar cell (PSC) was simulated via SCAPS 1-D. La-doped BaSnO3 (LBSO) was applied as the electron transport layer (ETL) unprecedentedly in the simulation study…

This study underscores the pivotal role of sodium (Na) supply in optimizing the optoelectronic properties of wide bandgap (~1.6 eV) Cu(In,Ga)S2 (CIGS) thin film absorbers for high efficiency solar cells. Our findings demonstrate that the…

Dye-sensitized solar cells (DSC), built upon organic/inorganic hybrid materials, are promising third generation solar cells, which attract wide attentions due to their low-cost, flexibility and environment-friendly properties. We review…

The geometrical structure and photoexcitation properties of Zn27-nCdnO27C42 complexes are investigated by density functional theory (DFT) and time-dependent DFT calculations at the PBE0/6-31G*/SDD level of theory. The cohesive energy and…