Related papers: Study of a Novel Capacitive Pressure Sensor Using …
Accurate absorption models for gases at high pressure and temperature support advanced optical combustion diagnostics and aid in the study of harsh planetary atmospheres. Developing and validating absorption models for these applications…
Quantum sensors based on single solid-state spins promise a unique combination of sensitivity and spatial resolution. The key challenge in sensing is to achieve minimum estimation uncertainty within a given time and with a high dynamic…
This paper presents a first study of the performance of a novel 2D position-sensitive microstrip detector, where the resistive charge division method was implemented by replacing the metallic electrodes with resistive electrodes made of…
We describe an inertial rotation sensor with a 30-cm cylindrical proof-mass suspended from a pair of 14-${\mu}$m thick BeCu flexures. The angle between the proof-mass and support structure is measured with a pair of homodyne interferometers…
Traditional methods for achieving high localization accuracy on tactile sensors usually involve a matrix of miniaturized individual sensors distributed on the area of interest. This approach usually comes at a price of increased complexity…
The objective of this paper is to draw attention to a possible new approach for measuring the spin excitation spectrum of a spin array by placing it in intimate contact with the channel of a spin-valve device in an anti-parallel (AP)…
Objective: The objective of this work is to introduce and demonstrate the effectiveness of a novel sensing modality for contact detection between an off-the-shelf aspiration catheter and a thrombus. Methods: A custom robotic actuator with a…
We present the design, fabrication, and response of a polymer-based Laterally Amplified Chemo-Mechanical (LACM) humidity sensor based on mechanical leveraging and parametric amplification. The device consists of a sense cantilever…
This study proposes a novel design of glucose sensor with enhanced selectivity and sensitivity by using graphene Schottky diodes, which is composed of Graphene (G)/Platinum Oxide (PtO)/n-Silicon (Si) heterostructure. The sensor was tested…
Wide-band cable models for the prediction of electromagnetic transients in power systems require the accurate calculation of the cable series impedance as function of frequency. A surface current approach was recently proposed for systems…
A new experimental approach for the characterization of the lateral elastic modulus of individual nanowires is demonstrated by implementing a micro/nano scale diametrical compression test geometry, using a flat punch indenter inside of a…
Two modifications of the Thermally Stimulated Depolarization Current method are proposed to improve resolution and sensitivity of the method by connecting either a real capacitor, or an additional resistor in series with the sample. It is…
Magnetic quantum sensors based on trapped ions utilize properties of quantum mechanics which have optimized precision and beat current limits in sensor technology. Trapped ions are highly sensitive in a large span of signal ranging from DC…
We present a method of sensing AC magnetic fields. The method is based on the construction of a robust qubit by the application of continuous driving fields. Specifically, magnetic noise and power fluctuations of the driving fields do not…
Conventional pressure sensors often integrate two distinct mechanisms to detect static and dynamic stimuli, hindering the development of high fidelity human-machine interfaces. Here, we present an intrinsic static/dynamic triboelectric…
This paper describes a direct conversion receiver applying compressed sensing with the objective to relax the analog filtering requirements seen in the traditional architecture. The analog filter is cumbersome in an \gls{IC} design and…
Silicon detectors typically require an insensitive area around their periphery to accommodate guard rings, which help maintain the electric field uniformity around edge pixels and isolate the high leakage current from the physical edges of…
In this R&D, an innovative method for producing thin high-pressure laminate (HPL) electrodes for resistive plate chambers (RPC) for future high-energy experiments is introduced. Instead of using thick phenolic HPL (2-mm thick Bakelite),…
The embedded DRAM (eDRAM) is more and more used in System On Chip (SOC). The integration of the DRAM capacitor process into a logic process is challenging to get satisfactory yields. The specific process of DRAM capacitor and the low…
This article presents a Compact Nested Hexagonal Metamaterial Sensor designed for microwave sensing to characterize material permittivity in S and X-band applications. The proposed sensor attained compact dimensions of merely 30 mm x 30 mm…