Related papers: High-Resolution, Multi-Channel FPGA-Based Time-to-…

We implement a photon-counting Optical Time Domain Reflectometer (OTDR) at 1.55um which exhibits a high 2-point resolution and a high accuracy. It is based on a low temporal-jitter photon-counting module at 1.55um. This detector is composed…

8-Gsps 1-bit Analog-to-Digital Converters (ADCs) were newly developed toward the realization of the wideband observation. The development of the wideband ADCs is one of the most essential developments for the radio interferometer. To…

We construct a terahertz time-domain spectrometer (THz-TDS) system based on photoconductive antenna (PCA). A 800 nm Ti sapphire femtosecond laser with 80 MHz repetition rate provides the pump and probe laser pulse, which has a 45 fs pulse…

This work discusses the suitability of typical power line communication (PLC) pulses for fault sensing in power lines via pulse-compression time-domain reflectometry (TDR). For this purpose, we first carefully outline a TDR system operating…

Analog-to-digital converters (ADCs) allow physical signals to be processed using digital hardware. Their conversion consists of two stages: Sampling, which maps a continuous-time signal into discrete-time, and quantization, i.e.,…

At present, fast waveform digitizing circuit is more and more employed in modern physics experiments for processing the signals from an array detector. A new fast waveform sampling digitizing circuit developed by us is presented in this…

Real-time frequency readout of time-dependent pulsed signals with a high sensitivity are key elements in many applications using atomic devices, such as FID atomic magnetometers. In this paper, we propose a frequency measurement algorithm…

This paper describes a step by step approach for implementing a scalable and run-time adaptable multi-standard packet detector for orthogonal frequency divisional multiplexing (OFDM) based communication standards. The paper briefly…

1 ps timing resolution is the entry point to signature based searches relying on secondary/tertiary vertices and particle identification. We describe a preliminary design for PSEC5, an 8-channel 40 GS/s waveform-sampling ASIC in the TSMC 65…

This article presents a novel technique for precise measurement of time and charge based solely on FPGA (Field Programmable Gate Array) device and few satellite discrete electronic components used in Positron Emission Tomography (PET).…

Digital correlators play a significant role in dynamic light scattering (DLS) technology, which characterizes particle size distribution. We present a field programmable gate array (FPGA)-based digital correlator that can be applied to…

In the last years, high-resolution time tagging has emerged as the tool to tackle the problem of high-track density in the detectors of the next generation of experiments at particle colliders. Time resolutions below 50ps and event average…

Electronic systems are becoming more and more ubiquitous as our world digitises. Simultaneously, even basic components are experiencing a wave of improvements with new transistors, memristors, voltage/current references, data converters,…

Detectors based on pixels with timing capabilities are gaining increasing importance in the last years. Next-to-come high-energy physics experiments at colliders requires the use of time information in tracking, due to the increasing levels…

In the last decade, quantum computing has grown from novel physics experiments with a few qubits to commercial systems with hundreds of qubits. As quantum computers continue to grow in qubit count, the classical control systems must scale…

Accurate and low-latency qubit state measurement is critical for trapped-ion quantum computing. While deep neural networks (DNNs) have been integrated to enhance detection fidelity, their latency performance on specific hardware platforms…

RF system-on-chip (RFSoC) devices provide the potential for implementing a complete radio astronomy receiver on a single board, but performance of the integrated analogue-to-digital converters is critical. We have evaluated the performance…

We present the design of a new $\mu$TCA-based waveform digitizer, which will be deployed in the Muon g-2 experiment at Fermilab and will allow our pileup identification requirement to be met. This digitizer features five independent…

This paper addresses simultaneous, high-precision measurement and analysis of generic reference signals by using inexpensive commercial off-the-shelf Software Defined Radio hardware. Sine reference signals are digitally down-converted to…

Radiation measurement relies on pulse detection, which can be performed using various configurations of high-speed analog-to-digital converters (ADCs) and field-programmable gate arrays (FPGAs). For optimal power consumption, design…