Related papers: Cryogenic cesium iodide as a potential PET materia…
Alkali-metal antimonides, especially cesium-potassium-antimonide (CsK2Sb), are strong candidates for next-generation photocathodes in linear accelerators due to their low work-function, fast response, high quantum yield, and ability to…
This paper introduces a thermal infrared detector utilizing a nano-optomechanical silicon nitride (SiN) resonator, equipped with a free-space impedance-matched (FSIM) absorber composed of a platinum (Pt) thin film, offering a broadband…
All of the present methods for calibration and monitoring of TOF-PET scanner detectors utilize radioactive isotopes such as e.g. $^{22}$Na or $^{68}$Ge, which are placed or rotate inside the scanner. In this article we describe a novel…
The aim of this work is to show the potential capabilities of monolithic crystals coupled to large SiPM arrays, to be considered as detector blocks for PET scanners enabling Time Of Flight (TOF) capabilities. Monolithic blocks allow one to…
For the High-Luminosity (HL-LHC) phase, the upgrade of the Compact Muon Solenoid (CMS) experiment at CERN will include a novel MIP Timing Detector (MTD). The central part of MTD, the barrel timing layer (BTL), is designed to provide a…
Current clinical PET systems utilize detectors where the scintillator typically contains single elements of 3 - 6 mm width and about 20 mm height. While providing good TOF performance, this design limits the spatial resolution and causes…
Bismuth telluride-based materials is the only commercially viable room-temperature thermoelectric material, despite its limited tellurium and poor mechanical properties. The search for materials with a high figure of merit (zT > 1.00) near…
With centre-of-mass energies covering the Z pole, the WW threshold, the HZ production, and the top-pair threshold, the FCC-ee offers unprecedented possibilities to measure the properties of the four heaviest particles of the Standard Model…
Presice measurements of the photons conversion points in the scintillators are required to achieve a high spatial resolution of the PET system. I have developed a new method of reconstruction of the depth-of-interaction information for PET…
The thermal model of particle production is used to analyze the particle ratios and the p_T spectra measured recently at RHIC. Our fit of the particle ratios yields the temperature at the chemical freeze-out T_chem = 165 +- 7 MeV with the…
We demonstrate a prototype of a Focused Ion Beam machine based on the ionization of a laser-cooled cesium beam adapted for imaging and modifying different surfaces in the few-tens nanometer range. Efficient atomic ionization is obtained by…
Scientific Complementary Metal Oxide Semiconductor (sCMOS) sensors are finding increasingly more applications in astronomical observations, thanks to their advantages over charge-coupled devices (CCDs) such as a higher readout frame rate,…
A new comprehensive study on the Cs${_2}$ZrCl${_6}$ (CZC) crystal scintillating properties under different types of irradiation was performed over a wide temperature range from 5 to 300 K. The light yield (LY) at room temperature (RT),…
Cryogenic opto-electronic interconnects are gaining increasing interest as a means to control and read out cryogenic electronic components. The challenge is to achieve sufficient signal integrity with low heat load processing. In this…
Atomic layer deposition was used to synthesize niobium silicide (NbSi) films with a 1:1 stoichiometry, using NbF5 and Si2H6 as precursors. The growth mechanism at 200oC was examined by in-situ quartz crystal microbalance (QCM) and…
This work summarizes the design, construction, initial performance evaluation and pilot clinical results of the IMAS system, a long axial field of view (FOV), also known as total-body (TB-), positron emission tomography (PET) prototype…
Ratios of integrated particle yields provide the best method for determining the temperature and the chemical potential. The chemical freeze-out parameters obtained at CERN/SPS, BNL/AGS and GSI/SIS energies all correspond to a unique value…
Applications for ultra-stable lasers outside controlled laboratory environments require compact and robust optical resonators with reduced sensitivity to temperature fluctuations. The low thermal expansion coefficient (CTE) and the high…
In this work, we study the suitability of different thermoelectric materials like $Bi_2Te_3$, $Sb_{2}Te_{3}$, $PbTe$, $TAGS$, $CeFe_{4}Sb_{12}$, $SiGe$ and $TiO_{1.1}$ in estimation of thermoelectric generator's (TEG) efficiency. The…
The radiation damage to a silicon photomultiplier (SiPM) set on a satellite orbit increases energy threshold for scintillator detectors. We confirmed that 1 krad of radiation increases the energy threshold by approximately a factor of 10,…