Related papers: Multipacting mitigation by atomic layer deposition…
This paper reports on the demonstration of a high-rate energy measurement technique using a thin depletion layer silicon avalanche photodiode (Si-APD). A dedicated amplitude-to-time converter is developed to realize simultaneous energy and…
We have grown superconducting TiN films by atomic layer deposition with thicknesses ranging from 6 to 89 nm. This deposition method allows us to tune the resistivity and critical temperature by controlling the film thickness. The microwave…
Through its capability for 3D mapping of Li at the nanoscale, atom probe tomography (APT) is poised to play a key role in understanding the microstructural degradation of lithium-ion batteries (LIB) during successive charge and discharge…
Metal mixed polymers are a cheap and effective way to produce flexible metals and superconductors. As part of an on-going effort to learn how to tune the properties of these systems with ion implantation, we present a study of the…
A new type of field emission display(FED) based on an edge-enhance electron emission from metal-insulator-semiconductor (MIS) thin film structure is proposed. The electrons produced by an avalanche breakdown in the semiconductor near the…
Superconductors, an essential class of functional materials, hold a vital position in both fundamental science and practical applications. However, most superconductors, including MgB$_2$, Bi$_2$Sr$_2$CaCu$_2$O$_{8+\delta}$, and FeSe, are…
Aluminum nitride (AlN) is an extremely promising material for integrated photonics because of the combination of strong \c{hi}2 and \c{hi}3 nonlinearities. However, the intrinsic hardness of the material and charging effects during electron…
The microlens is a key enabling technology in optoelectronics, permitting light to be efficiently coupled to and from devices such as image sensors and light-emitting diodes. Their ubiquitous nature motivates the development of new…
Effective passivation of lithium metal surfaces, and prevention of battery-shorting lithium dendrite growth, are critical for implementing lithium-metal-anodes for batteries with increased power densities. Nanoscale surface heterogeneities…
We report the growth of highly c-axis oriented topological insulator (TI) BiSbTe1.5Se1.5 (BSTS) thin films by pulsed laser deposition (PLD) technique. The various growth parameters such as substrate temperature, Argon pressure in the…
Magnetic tunnel junctions (MTJ) with AlOx barrier were fabricated by a deposition tool called Biased Target Ion Beam Deposition (BTIBD) using low energy ion source (0-50 eV) and voltage biased targets. The BTIBD system applies bias voltage…
Numerical simulations are used in this work to investigate aspects of microstructure and microsegregation during rapid solidification of a Ni-based superalloy in a laser powder bed fusion additive manufacturing process. Thermal modeling by…
We address the detection of material defects, which are inside a layered material structure using compressive sensing based multiple-input and multiple-output (MIMO) wireless radar. Here, the strong clutter due to the reflection of the…
We realize collective enhancement and suppression of light scattered by an array of tweezer-trapped $^{87}$Rb atoms positioned within a strongly coupled Fabry-P\'{e}rot optical cavity. We illuminate the array with light directed transverse…
Soft ferromagnetic NiFe thin films are promising for applications in spintronic devices because of their constituent electrical and magnetic properties. Electron beam evaporation and sputtering techniques have been used to deposit NiFe thin…
We report on simulations of a novel design of optical titanium nitride (TiN)- based Kinetic Inductance Detectors (KIDs) in order to improve their response to optical photons. We propose to separate the meander from the substrate to trap hot…
Monolayer transition metal dichalcogenides (1L-TMDs) have tremendous potential as atomically thin, direct bandgap semiconductors that can be used as convenient building blocks for quantum photonic devices. However, the short exciton…
We have investigated properties of superconducting titanium nitride (TiN) films that were sputtered over a large range of RF-induced DC bias voltage applied to the substrate. Films grown with the largest bias voltages contained cubic TiN…
The large volume change of the silicon (Si) during lithiation and delithiation process has long been a problem impeding its application as one of the most promising anode materials for LIBs. In this paper, we proposed a conceptually new…
Integration of single-photon emitters (SPEs) with resonant photonic structures is a promising approach for realizing compact and efficient single-photon sources for quantum communications, computing, and sensing. Efficient interaction…