Related papers: A Passive and Asynchronous Wake-up Receiver for Ac…
Large-scale Internet of Things (IoT) applications, such as asset tracking and remote sensing, demand multi-year battery lifetimes to minimize maintenance and operational costs. Traditional wireless protocols often employ duty cycling,…
With the advancements in underwater wireless communications, internet of underwater things (IoUT) realization is inevitable to enable many practical applications, such as exploring ocean resources, ocean monitoring, underwater navigation,…
In this work we propose a new scheme for semi-passive Wake-Up Receiver circuits that exhibits remarkable sensitivity beyond -70 dBm, while state-of-the-art receivers illustrate sensitivity of up to -55 dBm. The receiver employs the typical…
Since its inception, underwater digital acoustic communication has required custom hardware that neither has the economies of scale nor is pervasive. We present the first acoustic system that brings underwater messaging capabilities to…
Providing energy-efficient Internet of Things (IoT) connectivity has attracted significant attention in fifth-generation (5G) wireless networks and beyond. A potential solution for realizing a long-lasting network of IoT devices is to equip…
Underwater vehicles are utilized in various applications including underwater data-collection missions. The tethered connection constrains the mission both in distance traveled and number of vehicles that can run in the same area, while the…
The underwater acoustic channel is characterized by a path loss that depends not only on the transmission distance, but also on the signal frequency. As a consequence, transmission bandwidth depends on the transmission distance, a feature…
Energy neutral operation of WSNs can be achieved by exploiting the idleness of the workload to bring the average power consumption of each node below the harvesting power available. This paper proposes a combination of state-of-the-art…
In this article we research about underwater acoustics transceivers. As Underwater acoustic transceivers consume more power than Radio frequency transceivers. The techniques which are being utilized in radio frequency cannot be implemented…
Underwater Wireless Optical Communication is a key enabling technology for future space-air-ground-sea integrated networks. However, UOWC faces critical hurdles from spatial randomness and stringent energy constraints. These challenges…
Channel sensing consists of probing the channel from time to time to check whether or not it is active - say, because of an incoming message. When communication is sparse with information being sent once in a long while, channel sensing…
This paper presents an always-on low-power wake-up receiver (WuRx) that activates the remainder of the system when a wake-up signal is detected. The proposed receiver has two phases of waking up. The first phase uses an integrated CMOS…
Ambient Internet of Things (A-IoT) devices, as a critical enabler of future green IoT networks, have attracted broad interest from both industry and academia due to their ability to operate without batteries and with low maintenance costs.…
We present a high performance low-power digital base-band architecture, specially designed for an energy optimized duty-cycled wake-up receiver scheme. Based on a careful wake-up beacon design, a structured wake-up beacon detection…
Low-power and long-range communication tech- nologies such as LoRa are becoming popular in IoT applications due to their ability to cover kilometers range with milliwatt of power consumption. One of the major drawbacks of LoRa is the data…
Inductive coupling communication is one of the main methods of underwater communication systems due to its excellent comprehensive performance. However, the data transmission distance and operational power consumption need to be further…
Wireless sensor nodes spend most of their time in standby mode and wake up periodically to send the measurement data. Conventionally, the wake-up function is realized using a radio-frequency oscillator with an amplifier to recognize an…
Full-duplex (FD) communication is a promising candidate to address the data rate limitations in underwater acoustic (UWA) channels. Because of transmission at the same time and on the same frequency band, the signal from the local…
Increased traffic demands globally and in particular in short-reach links in data centers will require optical communication systems to continue scaling at an accelerated pace. Nevertheless, energy constraints start to limit the bit rate…
This paper will focus on the energy efficiency issue in Underwater Wireless Sensor Networks. In underwater environment, the two main issues are namely: reliability and energy efficiency. These two issues are twisted pair. Reliability…