Related papers: 3-way equal filtering power divider using compact …

This paper reports the first piezoelectric acoustic filter in periodically poled piezoelectric film (P3F) lithium niobate (LiNbO3) at 23.8 GHz with low insertion loss (IL) of 1.52 dB and 3-dB fractional bandwidth (FBW) of 19.4%. The filter…

Electronic devices primarily aim to offer low power consumption, high speed, and a compact area. The performance of very large-scale integration (VLSI) devices is influenced by arithmetic operations, where multiplication is a crucial…

A novel OFDM-based waveform with low peak-to-average power ratio (PAPR) and high robustness against phase noise (PN) is presented. It follows the discrete Fourier transform spread orthogonal frequency division multiplexing (DFT-s-OFDM)…

In wavelength division multiplexing (WDM) schemes, splitters must be used to combine and separate different wavelengths. Conventional splitters are fairly large with footprints in hundreds to thousands of square microns, and…

High Peak-to-Average Power Ratio (PAPR) is still a common issue in multicarrier signal modulation systems such as Orthogonal Chirp Division Multiplexing (OCDM) and Affine Frequency Division Multiplexing (AFDM), which are envisioned to play…

Terahertz bands enable ultra-broadband wireless communications but require compact, low-cost, and efficient transceiver modules. Conventional implementations based on metallic waveguides or silicon lenses suffer from high loss, bulkiness,…

In this paper, a new single-carrier waveform, called chirped discrete Fourier transform spread orthogonal frequency division multiplexing (DFT-s-OFDM), is proposed for the sixth generation of communications. As the initial study on this…

Millimeter wave (mmWave) full-duplex (FD) is a promising technique for improving capacity by maximizing the utilization of both time and the rich mmWave frequency resources. Still, it has restrictions due to FD self-interference (SI) and…

The creation of high-performance narrowband filters is of great interest for many RF-signal processing applications. To this end, numerous schemes for electronic, MEMS-based, and microwave photonic filters have been demonstrated. Filtering…

Monolithic integration of multiband (1.4~ 6.0 GHz) RF acoustic devices were successfully demonstrated within the same process flow by using the lithium niobate (LN) thin film on silicon carbide (LNOSiC) substrate. A novel surface mode with…

Polymer based electro-optic modulators have shown great potentials in high frequency analog optical links. Existing commercial LiNibO3 Mach-Zehnder modulators have intrinsic drawbacks in linearity to provide high fidelity communication. In…

We designed Si-based all-dielectric 1 $\times$ 2 TE and TM power splitters with various splitting ratios and simulated them using the inverse design of adjoint and numerical 3D finite-difference time-domain methods. The proposed devices…

We demonstrate a remote microwave/radio-frequency (RF) transfer technique based on the stabilization of a fiber link using a fiber-loop optical-microwave phase detector (FLOM-PD). This method compensates for the excess phase fluctuations…

A water-based switchable frequency selective rasorber with polarization selectivity using the Great Wall structures is presented in this paper. The proposed structure comprises a container containing horizontal and vertical channels…

The reflectionless filter cell described in this article alleviates many system problems associated with excess out-of-band gain, impedance mismatches, and component interactions. The simplest filter cell exhibits a third-order Inverse…

Next generation wireless communication technology long term evolution (LTE) has implemented orthogonal frequency division multiplexing (OFDM) technique as a strong candidate for radio access systems. It has several attributes such as…

In this work, a 38.7 GHz acoustic wave ladder filter exhibiting insertion loss (IL) of 5.63 dB and 3-dB fractional bandwidth (FBW) of 17.6% is demonstrated, pushing the frequency limits of thin-film piezoelectric acoustic filter technology.…

This study proposes a 3D-printed, quad-ridged, dual-pol, flared horn antenna feeder to meet the demands of a modern radio-telescope. The research work presented in this paper involves both the theoretical and the customized / adapted…

The limitations of centralized optimization methods for power systems operation have led to the distributed computing paradigm, particularly in power distribution systems. The existing techniques reported in recent literature for solving…

This paper reports an 11.7 GHz compact 50 ohm ladder filter based on single layer Scandium Aluminum Nitride (ScAlN) film bulk acoustic resonators (FBARs) with platinum (Pt) electrodes, and uses it as a quantitative case study of the limits…