Related papers: Full-Duplex Multiuser MISO Under Coarse Quantizati…
Hybrid digital/analog architecture and low-resolution analog-to-digital/digital-to-analog converters (ADCs /DACs) are two low-cost implementations for large-scale millimeter wave (mmWave) systems. In this paper, we investigate the problem…
Photonic analog to digital conversion offers promise to overcome the signal-to-noise ratio (SNR) and sample rate trade-off in conventional analog to digital converters (ADCs), critical for modern digital communications and signal analysis.…
The conventional digital beamforming technique needs one radio frequency (RF) chain per antenna element. High power consumption, significantly high cost of RF chain components per antenna and complex signal processing task at base band…
When a quantizer input signal is the sum of the desired signal and input white noise, the quantization error is a function of total input signal. Our new equivalent model splits the quantization error into two components: a non-linear…
Beamforming design has been widely investigated for integrated sensing and communication (ISAC) systems with full-duplex (FD) sensing and half-duplex (HD) communication. To achieve higher spectral efficiency, in this paper, we extend…
In this paper, we study Full Duplex (FD) Multiple-Input Multiple-Output (MIMO) radios for simultaneous data communication and control information exchange. Capitalizing on a recently proposed FD MIMO architecture combining digital transmit…
Low-resolution digital-to-analog and analog-to-digital converters (DACs and ADCs) have attracted considerable attention in efforts to reduce power consumption in millimeter wave (mmWave) and massive MIMO systems. This paper presents an…
This paper designs hybrid analog-digital channel estimation and beamforming techniques for multiuser massive multiple input multiple output (MIMO) systems with limited number of radio frequency (RF) chains. For these systems, first we…
Full-Duplex (FD) Amplify-and-Forward (AF) Multiple-Input Multiple-Output (MIMO) relaying has been the focus of several recent studies, due to the potential for achieving a higher spectral efficiency and lower latency, together with inherent…
In recent years, there has been extensive research on millimeter-wave (mmWave) communication and on in-band full-duplex (FD) communication, but work on the combination of the two is relatively lacking. FD mmWave systems could offer…
In cell-free massive MIMO systems with multiple distributed access points (APs) serving multiple users over the same time-frequency resources, downlink beamforming is done through spatial precoding. Precoding vectors can be optimally…
Full duplex (FD) systems suffer from very high hardware cost and high power consumption to mitigate the self-interference (SI) in the analog domain. Moreover, in millimeter wave (mmWave) they rely on hybrid beamforming (HYBF) as a signal…
Low-resolution analog-to-digital converters (ADCs) are promising for reducing energy consumption and costs of multiuser multiple-input multiple-output (MIMO) systems with many antennas. We propose low-resolution multiuser MIMO receivers…
This work investigates the downlink performance of a multi-cell massive multiple-input multiple-output (MIMO) system that employs one-bit analog-to-digital converters (ADCs) and digital-to-analog converters (DACs) in the receiving and…
This paper studies the design and optimization of a limited feedback single-user system with multiple-antenna transmitter and single-antenna receiver. The design problem is cast in form of the minimizing the average transmission power at…
Enabling communications in the (sub-)THz band will call for massive multiple-input multiple-output (MIMO) arrays at either the transmit- or receive-side, or at both. To scale down the complexity and power consumption when operating across…
Analog-to-digital converters (ADCs) play a critical role in digital signal acquisition across various applications, but their performance is inherently constrained by sampling rates and bit budgets. This bit budget imposes a trade-off…
In this paper, we propose a two-stage analog combining architecture for millimeter wave (mmWave) communications with hybrid analog/digital beamforming and low-resolution analog-to-digital converters (ADCs). We first derive a two-stage…
The in-band Full Duplex (FD) technology is lately gaining attention as an enabler for the emerging paradigm of Integrated Sensing and Communications (ISAC), which envisions seamless integration of sensing mechanisms for unconnected entities…
This paper considers the context of multiuser massive MIMO downlink precoding with low-resolution digital-to-analog converters (DACs) at the transmitter. This subject is motivated by the consideration that it is expensive to employ…