Related papers: Upper efficiency limit of Sb2Se3 solar cells
Antimony sulfide (Sb2S3) is a promising candidate as an absorber layer for single-junction solar cells and the top subcell in tandem solar cells. However, the power conversion efficiency of Sb2S3-based solar cells has remained stagnant over…
With the consideration of photon recycling effect, the efficiency limit of methylammonium lead iodide (CH3NH3PbI3) perovskite solar cells is predicted by a detailed balance model. To obtain convincing predictions, both AM 1.5 spectrum of…
Sb2S3 is a promising material for low-toxicity, high-stability next-generation photovoltaics. Despite high optical limits in efficiency, progress in improving its device performance has been limited by severe voltage losses. Recent…
The Shockley-Queisser (SQ) limit provides a convenient metric for predicting light-to-electricity conversion efficiency of a solar cell based on the band gap of the light-absorbing layer. In reality, few materials approach this radiative…
Transition metal dichalcogenides (TMDs) show great promise as absorber materials in high-specific-power (i.e. high-power-per-weight) solar cells, due to their high optical absorption, desirable band gaps, and self-passivated surfaces.…
Advances in photovoltaic technology are a viable route to contribute to cleaner and more sustainable energy solutions, placing perovskite-based materials among the best candidates for solar energy conversion. However, some challenges must…
Antimony sulfide (Sb2S3) and selenide (Sb2Se3) are emerging earth-abundant absorbers for photovoltaic applications. Solar cell performance depends strongly on charge carrier transport properties but these remain poorly understood in Sb2X3.…
It is currently possible to fabricate crystalline silicon solar cells with the absorber thickness ranging from a few hundreds of micrometers (conventional wafer-based cells) to devices as thin as $1\,\mu\mathrm{m}$. In this work, we use a…
The use of stibnite (Sb2S3) as sensitizers in the solid-state sensitized solar cells received considerable research interest during the transition of the millennium. However, the use of perovskite diminished the research in the field and…
The Shockley and Queisser limit, a well-known efficiency limit for a solar cell, is based on unrealistic physical assumptions and its maximum limit is seriously overestimated. To understand the power loss mechanisms of record-efficiency…
Perovskite (CH3NH3PbI3) solar cells have made significant advances recently. In this paper, we propose a bilayer heterojunction solar cell comprised of a perovskite layer combining with a IV-VI group semiconductor layer, which can give a…
Maximum efficiency of ideal single-junction photovoltaic (PV) cells is limited to 33% (for one sun illumination) by intrinsic losses such as band edge thermalization, radiative recombination, and inability to absorb below-bandgap photons.…
We report on the fabrication and optimization of semi-transparent antimony sulfide (Sb$_2$S$_3$) thin-film solar cells in a superstrate configuration, using RF magnetron sputtering of metallic antimony followed by post-deposition…
Organic-inorganic halide perovskite materials have emerged as attractive alternatives to conventional solar cell building blocks. Their high light absorption coefficients and long diffusion lengths suggest high power conversion efficiencies…
Hybrid organic-inorganic halide perovskites have emerged as a disruptive new class of materials, exhibiting optimum properties for a broad range of optoelectronic applications, most notably for photovoltaics. The first report of highly…
Ternary chalcostibite copper antimony selenide (CuSbSe2) is a promising absorber material for next generation thin film solar cells due to the non-toxic nature, earth-abundance, low-cost fabrication technique, optimum bandgap and high…
Indoor photovoltaics (IPVs) have attracted increasing attention for sustainably powering Internet of Things (IoT) electronics. Sb$_2$S$_3$ is a promising IPV candidate material with a bandgap of ~1.75 eV, which is near the optimal value for…
There are recent investigations regarding tandem solar cells with a top perovskite cell and a bottom silicon one with a potential of > 25% power conversion efficiency. Because of still high production costs of silicon cells it is believed…
Computational searching and screening of new functional materials exploiting earth abundant elements can accelerate developments of their energy applications. Based on a state-of-the-art materials search algorithm and ab initio…
Perovskite semiconductors have demonstrated outstanding external luminescence quantum yields, enabling high power conversion efficiencies (PCE). However, the precise conditions to advance to an efficiency regime above monocrystalline…