Related papers: Single-Photon-Assisted Two-Photon Polymerization
We show that with the use of a short wavelength (520nm) femtosecond laser source, Two-Photon Polymerization (2PP) fabrication of micro-membrane designs with channel sizes down to 1 {\mu}m is possible, using commercial photopolymers OrmoComp…
Two-photon photopolymerization of UV curing resins is an attractive method for the fabrication of microscopic transparent objects with size in the tens of micrometers range. We have been using this method to produce three-dimensional…
Light-based 3D printing, which relies on photocurable resins, has shown the capability to produce complex geometries with high resolution and fidelity. Tomographic Volumetric Additive Manufacturing (TVAM) employs a digital micromirror…
Polymer 3D printing is a broad set of manufacturing methods that permit the fabrication of complex architectures, and, as a result, numerous efforts focus on formulating processible chemistries that produce desirable material behavior in…
Frontal photopolymerization (FPP) provides a versatile method for the rapid fabrication of solid polymer network materials by exposing photosensitive molecules to light. Dimensional control of structures created by this process is crucial…
Additive manufacturing using light is commonly constrained by serial voxel-by-voxel or layer-by-layer processing, which fundamentally limits fabrication speed and scalability. Here, we introduce a single-exposure holographic…
Two-dimensional (2D) materials, due to their remarkable physical and chemical properties, hold significant potential for future optical and electrical applications. In this study, the synthesis of 2D phlogopite (magnesium-rich mica) via…
High-resolution lithographic techniques are often limited by low volumetric throughput, since there is no universal and scalable manufacturing process that can produce 3D metasurfaces. In this work, we demonstrate a high-speed holographic…
3D printing has revolutionized the manufacturing of volumetric components and structures for various fields. Thanks to the advent of photocurable resins, several fully volumetric light-based techniques have been recently developed to…
Two-photon photopolymerization (TPP) has recently become a popular method for the fabrication of three-dimensional (3D) micro- and nanostructures. The reproduction fidelity of the designed micro- and nanostructures is influenced by…
Ceramics are highly technical materials with properties of interest for multiple industries. Precisely because of their high chemical, thermal, and mechanical resistance, ceramics are difficult to mold into complex shapes. A possibility to…
We demonstrate the fabrication of volume holograms using 2-photon polymerization with dynamic control of light exposure. We refer to our method as (3+1)D printing. Volume holograms that are recorded by interfering reference and signal beams…
Throughput and resolution are both of critical importance for modern manufacturing, however, they are usually contradictory with each other. Here, a high-throughput high-resolution three dimensional (3D) printing is demonstrated by…
3D printing has revolutionized numerous scientific fields and industries, with printing in biological systems emerging as a rapidly advancing area of research. However, its application to the subcellular level remains largely unexplored.…
Two-photon absorption (TPA) and other nonlinear interactions of molecules with time-frequency-entangled photon pairs (EPP) has been predicted to display a variety of fascinating effects. Therefore, their potential use in practical…
In this work we demonstrate 3D imaging using two-photon excitation through a 20 cm long multimode optical fiber (MMF) of 350 micrometers diameter. The imaging principle is similar to single photon fluorescence through a MMF, except that a…
The use of individual multimode optical fibers in endoscopy applications has the potential to provide highly miniaturized and noninvasive probes for microscopy and optical micromanipulation. A few different strategies have been proposed…
Photopolymerization processes are exploited in light exposure-based 3D printing technologies, where either a focused laser beam or a patterned light sheet allows layers of a UV curable, liquid pre-polymer to be solidified. Here we focus on…
Additive manufacturing techniques are revolutionizing product development by enabling fast turnaround from design to fabrication. However, the throughput of the rapid prototyping pipeline remains constrained by print optimization, requiring…
There have been continuous efforts to seek for novel functional two-dimensional semiconductors with high performance for future applications in nanoelectronics and optoelectronics. In this work, we introduce a successful experimental…