Related papers: Correlation between microstructural deformation me…
The mechanisms that govern a previously unexplained hardening effect of a single phase Cu-30wt%Zn {\alpha}-brass after heating have been investigated. After cold-work, the alloy possesses an increased yield strength and hardening rate only…
Knowledge of the state of plastic deformation in metallic structures is vital to prevent failure. This is why non-destructive acoustic tests based on the measurement of first order elastic constants have been developed and intensively used.…
The acoustic nonlinearity parameter(beta) is sensitive to dislocation parameters, which continuously change during plastic deformation. Dislocation-based damage in structures/components is the source of the failure; thus, beta has been…
Plastic deformation of micron-scale crystalline materials differ considerably from bulk ones, because it is characterized by random strain bursts. To obtain a detailed picture about this stochastic phenomenon, micron sized pillars have been…
We deform, in pure shear, a thin sample of Cu$_{50}$Zr$_{50}$ metallic glass using a molecular dynamics simulation up to, and including, failure. The experiment is repeated ten times in order to have average values and standard deviations.…
Fifteen marble samples were subjected to semi-brittle deformation through triaxial compression experiments, reaching axial strains of 0.5%, 1.0%, 2.0%, 4.0%, or 7.5% at temperatures of 20C, 200C, or 350C, under a confining pressure of 400…
Severe plastic deformation changes the microstructure and properties of steels, which may be favourable for their use in structural components of nuclear reactors. In this study, high-pressure torsion (HPT) was used to refine the grain…
The microstructure and mechanical properties of materials saturate to steady states after severe plastic deformation (SPD). Despite the well-known effect of temperature on the steady-state microstructure, there is no general agreement on…
Despite the long history, so far there is no general theoretical framework for calculating the acoustic emission spectrum accompanying any plastic deformation. We set up a discrete wave equation with plastic strain rate as a source term and…
The mechanical properties and deformation mechanisms of Cu/Nb nanoscale metallic multilayers (NMMs) manufactured by accumulative roll bonding (ARB) are studied at 25C and 400C. Cu/Nb NMMs with individual layer thicknesses between 7 and 63…
Bulk nanocrystalline materials of small and medium ferromagnetic content were produced using severe plastic deformation by high-pressure torsion at roomtemperature. Giant magnetoresistive behavior was found for as deformed materials, which…
Density functional perturbation theory calculations of alpha-quartz using extended norm conserving pseudopotentials have been used to study the elastic properties and phonon dispersion relations along various high symmetry directions as a…
A new set-up to measure acoustic wave velocities through deforming rock samples at high pressures (up to 1000 MPa), temperatures (up to 700$^\circ$C) and differential stress (up to 1500 MPa) has been developed in a recently refurbished gas…
The shear-transformation-zone (STZ) theory of plastic deformation predicts that sufficiently soft, non-crystalline solids are linearly unstable against forming periodic arrays of microstructural shear bands. A limited nonlinear analysis…
The possibility of shifting sound energy from lower to higher frequency bands is investigated. The system configuration considered is a segmented structure having non-linear stiffness characteristics. It is proposed here that such a…
Severe plastic deformation using high-pressure torsion of ternary Cu-based materials (CuFeCo and CuFeNi) was used to fabricate bulk samples with a nanocrystalline microstructure. The goal was to produce materials featuring the granular…
In this paper, the flutter behaviour of simply supported square functionally graded material plates immersed in a supersonic flow is studied. An enriched 4-noded quadrilateral element based on field consistency approach is used for this…
The material properties selection for designing acoustic filters with optimal performance over a range of frequencies requires considerable effort to fabricate and test laboratory samples. To simplify this procedure, one may test a single…
Dense ceramics are irreplaceable in applications requiring high mechanical stiffness, chemical and temperature resistance and low weight. To improve their toughness, ceramics can be reinforced with elongated inclusions. Recent manufacturing…
The appraisal of metallic materials requires application of advanced characterisation techniques. In this paper, the use has been made of Scanning Electron Microscopy, Transmission Electron Microscopy, X-ray diffraction (XRD) and Energy…