Related papers: An Intra-pulse feedforward algorithm for improving…
Advanced feedforward control methods enable mechatronic systems to perform varying motion tasks with extreme accuracy and throughput. The aim of this paper is to develop a data-driven feedforward controller that addresses input…
Recently we have shown a system developed to precisely control the laser pulse timing of excimer lasers [1]. The electronic circuit based on an embedded microcontroller and utilized the natural jitter noise of the laser pulse generation to…
An indoor, real-time location system (RTLS) can benefit both hospitals and patients by improving clinical efficiency through data-driven optimization of procedures. Bluetooth-based RTLS systems are cost-effective but lack accuracy and…
Pulse-to-pulse orbit jitter, if not controlled, can drastically degrade the luminosity in future linear colliders. The second goal of the ATF2 project at the KEK accelerator test facility is to stabilise the vertical beam position down to…
In this paper, a novel diffusion estimation algorithm is proposed from a probabilistic perspective by combining diffusion strategy and the probabilistic least-mean-squares (PLMS) at all agents. The proposed method diffusion probabilistic…
The family of multi-plane phase retrieval sensors, such as the curvature and nonlinear curvature wavefront sensors (WFS), contain tip/tilt information embedded in their signals. We have built a nonlinear curvature WFS to study different…
The proposed Next Linear Collider (NLC) contains linac systems operating at L,S,C, and X band. This paper describes a wideband modular low-level RF (LLRF) system applicable for all NLC pulsed RF systems. High speed digital IF techniques are…
Recently we have reported on a compact microcontroller-based unit developed to accurately synchronise excimer laser pulses (Robert Mingesz et al, Fluct. Noise Lett. 11, 1240007 (2012), DOI: 10.1142/S021947751240007X, arXiv:1109.2632). We…
Synchronous reference frame phase-looked loop (SRF-PLL) techniques are widely used for interfacing and control applications in the power systems and energy conversion at large. Since a PLL system synchronizes its output with an exogenous…
This paper describes several new algorithms for estimating the parameters of a periodic bandlimited signal from samples corrupted by jitter (timing noise) and additive noise. Both classical (non-random) and Bayesian formulations are…
Feedforward control is essential to achieving good tracking performance in positioning systems. The aim of this paper is to develop an identification strategy for inverse models of systems with nonlinear dynamics of unknown structure using…
In radio astronomy, accurate calibration is of crucial importance for the new generation of radio interferometers. More specifically, because of the potential presence of outliers which affect the measured data, robustness needs to be…
A pulsar's pulse profile gets broadened at low frequencies due to dispersion along the line of sight or due to multi-path propagation. The dynamic nature of the interstellar medium makes both of these effects time-dependent and introduces…
An implementation of a harmonic injection pulse width modulation frequency-modulated triangular carrier (HIPWM-FMTC) control strategy applied to a multilevel power inverter feeding an asynchronous motor is presented. The aim was to justify…
Bolometric experiments searching for rare events usually require an extremely low radioactive background to prevent spurious signals from mimicking those of interest, spoiling the sensitivity of the apparatus. In such contexts, radioactive…
A real-time ranging lidar with 0.1 Mega Hertz update rate and few-micrometer resolution incorporating dispersive Fourier transformation and instantaneous microwave frequency measurement is proposed and demonstrated. As time-stretched…
Long pulse modulators are used to produce high-voltage, high-power pulses with durations of several hundred microseconds up to some milliseconds. The loads are one or more klystrons for producing RF power to accelerate the particle beam in…
The primary accelerator of DCLS (Dalian Coherent Light Source) operates at a repetition rate of 20 Hz now, and the beam is divided at the end of the linear accelera-tor through Kicker to make two 10 Hz beamlines work simultaneously. For the…
In this paper, a frequency separation based adaptive feedforward control algorithm is developed with the ability to identify the plant and do compensation region by region. In this algorithm, the accelerometer signal is filtered by a series…
This work describes the LLRF and control system in use for a novel accelerator structure developed for a compact design operating in C-band developed by SLAC, with collaboration from RadiaBeam and RadiaSoft. This design is a pulsed…