Related papers: Achieving 45% efficiency of CIGS/CdS Solar Cell by…
CdTe-based thin film solar cell has been modeled and enumerated with a thin CuInTe2 (CIT) current booster layer. CdTe-based n-CdS/p-CdTe/p+-CIT/p++-WSe2 heterojunction device has been evaluated for the highest performance. It is revealed…
Following letter introduces a theoretical approach to investigate the effect of two-step GaN barrier layer growth methodology on the performance of InGaN/GaN MQW solar cell, in which a lower temperature GaN cap layer was grown on top of…
Power-conversion efficiency is a critical factor for the wider adoption of solar-cell modules. Thin-film solar cells are cheap and easy to manufacture, but their efficiencies are low compared to crystalline-silicon solar cells and need to…
This study investigates the critical role of buffer layers in enhancing the efficiency of thin-film CdTe solar cells. We explore non-toxic buffer materials, specifically ZnSe, ZnMgO, 3C-SiC, and WS2, as potential replacements for the…
The GaAs/AlGaAs materials system is well suited to multi-bandgap applications such as the multiple quantum well solar cell. GaAs quantum wells are inserted in the undoped AlGaAs active region of a pin structure to extend the absorption…
This study investigates a four-terminal mechanically stacked double junction photovoltaic device based on GaAs as a top subcell and Si as a bottom subcell. Unlike two terminal monolithically series connected double junction photovoltaics,…
This study explores the impact of an optimized amorphous silicon (a-Si) buffer layer on AlxIn1-xN-on-Si(100) heterojunction solar cells, with Al content varying from 0% (InN) to 55%. The buffer layer improves the structural quality of the…
We demonstrate single layer graphene/n-Si Schottky junction solar cells that under AM1.5 illumination exhibit a power conversion efficiency (PCE) of 8.6%. This performance, achieved by doping the graphene with…
Numerical simulation of a solar cell can provide various information that can be useful to maximize its power conversion efficiency (PCE). In that respect we carried out a set of numerical simulation using AFORS-HET simulation program.…
Like many optoelectronics, the highest quality III-V solar cells start out as thin single-crystalline multilayers on GaAs substrates. Separating these device layers from their growth substrate enables higher performing devices and wafer…
Perovskite (CH3NH3PbI3) solar cells have made significant advances recently. In this paper, we propose a bilayer heterojunction solar cell comprised of a perovskite layer combining with a IV-VI group semiconductor layer, which can give a…
III-V materials show a wide range of gaps making them ideal for the design of high efficiency solar cells. This chapter reviews relevant growth methods and material properties of these materials and discusses methods of combining…
The effects of thickness, doping concentration and recombination of AlSb films on the performance of CdS/AlSb cells are simulated by one dimensional simulation program called analysis of microelectronic and photonic structures(AMPS1D) soft…
A design tool was formulated for optimizing the efficiency of inorganic, thin-film, photovoltaic solar cells. The solar cell can have multiple semiconductor layers in addition to antireflection coatings, passivation layers, and buffer…
The paper proposes a theoretical approach to modeling the key characteristics of highly efficient gallium arsenide-based solar cells (SCs), using a one-dimensional SC model. The following recombination mechanisms are considered in the…
Two-terminal tandem cell architectures are believed to be an effective way to further improve the power conversion efficiency in solution processed photovoltaics. To design an efficient tandem solar cell, two key issues need to be…
A tandem GaAsP/SiGe solar cell has been developed employing group-IV reverse buffer layers grown on silicon substrates with a subsurface porous layer. Reverse buffer layers facilitate a reduction in the threading dislocation density with…
We show that the highly conductive polymer poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) can successfully be applied as a hole selective front contact in silicon heterojunction (SHJ) solar cells. In combination with a…
One effective way to prevent toxicity and improve the stability of materials for photovoltaic applications is to exclude lead and organic molecules from perovskite materials. Specifically, the CsSn1-xGexI3 appears to be a promising…
Elemental selenium is a promising wide-bandgap ($E_\mathrm{G}\approx$ 1.95 eV) photovoltaic material for the next generation of thin-film solar cells. To realize high-efficiency selenium solar cells, it is crucial to optimize the…