Related papers: Microstructural and material property changes in s…
Phase-field simulations of the martensitic transformation (MT) in the austenitic matrix, which has already undergone the plastic deformation, are carried out. For this purpose the elasto-plastic phase-field approach of incoherent MT…
The microstructural development in H13 tool steel upon nitriding by an ion beam process was investigated. The nitriding experiments were performed at a relatively low temperature of about 400\deg C and at constant ion beam energy (400 eV)…
The interaction of high-energy electrons and X-ray photons with soft semiconductors such as halide perovskites is essential for the characterisation and understanding of these optoelectronic materials. Using nano-probe diffraction…
We report the initial results from a systematic study of the hyperfine (HF) structure of antiprotonic helium (n,l) = (37,~35) carried out at the Antiproton Decelerator (AD) at CERN. We performed a laser-microwave-laser resonance…
We investigated the inhomogeneous electronic properties at the surface and interior of VO_{2} thin films that exhibit a strong first-order metal-insulator transition (MIT). Using the crystal structural change that accompanies a VO_{2} MIT,…
To extract structure information from proton elastic scattering off S isotopes at 320 MeV and Ni isotopes at $E_p=180$ MeV, this study proposes isotopic analyses combining nuclear structure and reaction calculations. The isotonic analysis…
High performance sheet metals with a multi-phase microstructure suffer from deformation induced damage formation during forming in the constituent phases but importantly also where these intersect. To capture damage in terms of the physical…
Background: Nuclear deformation provides a crucial characteristic of nuclear structure. Conventionally, the quadrupole deformation length of a nucleus, $\delta_{2}$, has often been determined based on a macroscopic model through a deformed…
Plastic waste entering the environment through landfilling or improper disposal poses substantial risks to ecosystems and human health. Photoreforming is emerging as a clean photocatalytic technology that degrades plastic waste to organic…
Dendritic microstructures are frequently observed in as-solidified refractory high-entropy alloys (RHEAs), and their homogenization typically requires a long-term heat treatment at extremely high temperatures. High-pressure torsion (HPT)…
Hexagonal metals have anisotropic coefficients of thermal expansion causing grain-level internal stresses during heating. High energy x-ray diffraction microscopy, a non-destructive, in situ, micromechanical and microstructural…
A stack of titanium foils was irradiated with 136 MeV 136Xe to study microstructure damage and phase stability of titanium upon irradiation. X- ray diffraction, scanning electron microscopy/energy dispersive spectroscopy and atomic force…
Fifteen marble samples were subjected to semi-brittle deformation through triaxial compression experiments, reaching axial strains of 0.5%, 1.0%, 2.0%, 4.0%, or 7.5% at temperatures of 20C, 200C, or 350C, under a confining pressure of 400…
My scientific activities aim at understand and predict the mechanical behaviour of steels, from fundamental mechanisms to macroscopic deformation. This manuscript is dedicated to the TWIP effect (TWinning Induced Plasticity) of high…
Materials which can undergo extremely fast displacive transformations as well as very slow diffusive transformations are studied using a Ginzburg-Landau framework to understand the physics behind microstructure formation and…
This work presents a detailed experimental-numerical analysis of a low-carbon dual-phase steel microstructure, revealing evidence of significant anisotropic plastic deformation in lath martensite. A careful determination of the habit plane…
Tungsten is the main candidate material for plasma-facing armour components in future fusion reactors. In-service, fusion neutron irradiation creates lattice defects through collision cascades. Helium, injected from plasma, aggravates…
Advanced nanodevices require high-precision machining of thin films using ultrafast lasers. However, thin-film fabrications cause variations in microstructure, crystallographic orientation, and residual stresses owing to coating conditions…
Nanoindentation is a widely used method for sensitive exploration of the mechanical properties of micromechanical systems. We derived an empirical analysis technique to extract stress-strain field gradient and divergence representations…
Zircaloy-4 is used extensively as nuclear fuel cladding materials and hydride embrittlement is a major failure mechanism. To explore the effect of {\delta}-hydride on plastic deformation and performance of Zircaloy-4, in situ high angular…