Related papers: Highly efficient CdTe solar cell with a thin CIT c…
Thin films of pure and self-deficient calcium titanites i.e., CaTiO$_3$, Ca$_{1-\alpha}$TiO$_3$, CaTi$_{1-\beta}$O$_3$ and CaTiO$_{3-\gamma}$ have been deposited on ITO substrate using dip coating method. X-ray diffraction and Scanning…
The effects of thickness, doping concentration and recombination of AlSb films on the performance of CdS/AlSb cells are simulated by one dimensional simulation program called analysis of microelectronic and photonic structures(AMPS1D) soft…
Interface recombination at the absorber buffer interface impedes the efficiency of a solar cell with an otherwise excellent absorber. The internal voltage or the quasi-Fermi level splitting (qFLs) measures the quality of the absorber.…
The power conversion efficiency of organic solar cells has recently improved beyond 20%. The active layers of these devices comprise of at least two organic semiconductors, forming a type II heterojunction. Hereby, the device performance is…
A 2-D photonic crystal was integrated experimentally into a thin-film crystalline-silicon solar cell of 1-{\mu}m thickness, after numerical optimization maximizing light absorption in the active material. The photonic crystal boosted the…
We propose a new concept for the design of high-efficiency photocells based on ultra-thin (submicron) semiconductor films of controlled thickness. Using a microscopic model of a thin dielectric layer interacting with incident…
Reducing the thickness of Cu(In,Ga)Se2 solar cells is a key objective in order to reduce production cost and to improve sustainability. The major challenge for sub-micron Cu(In,Ga)Se2 cells is the recombination at the backside. In standard…
Cu(In,Ga)Se2 based solar cells exceed power conversion efficiencies of 23 %. Yet, the fill factor of these solar cells, with best values around 80 %, is relatively low (Si reaches 84.9%) mostly due to diode factors greater than one.…
Composite light-trapping structures offer a promising approach to achieving broadband absorption and high efficiency in thin-film solar cells (TFSCs) in order to accelerate sustainable energy solutions. As the leading material in thin-film…
We employ simulation based approach for enhancing the efficiency of Cu2ZnSnS4 (CZTS) based solar cells. Initial benchmarking of simulation with the experimentally reported solar cell in literature is performed by incorporating a suitable…
Low cost, highly efficient, and stable solar cells demand low temperature processing, less stringent criteria on materials, and possibility of dynamic recovery from long term degradation: a combination of features unachievable from the…
Wide-gap Cu(In,Ga)S2 solar cells with In2O3:Sn (ITO) as transparent back contact are evaluated for the application as top cells in tandem devices. The effect of Na on the solar cell performance is investigated by supplying additional Na by…
The power conversion efficiency of an ultrathin CIGS solar cell was maximized using a coupled optoelectronic model to determine the optimal bandgap grading of the nonhomogeneous CIGS layer in the thickness direction. The bandgap of the CIGS…
The electrical conductivity of a CdS thin film, controlled by grain structures is essential to enhance its photoconductivity to be able to be fit as a window material in CdS/CdTe heterojunction solar cell. In order to characterize a thin…
The photovoltaic properties of carbon nanotube/Si heterojunction solar cells were investigated using network films of high quality single-walled carbon nanotubes (SWNTs) grown by atmospheric-pressure floating-catalyst chemical vapor…
Cu based ternary chalcogenides are gathering attention for sustainable energy applications due to their reduced complexity compared to quaternary alternatives. We used drift diffusion modeling to evaluate the feasibility of photovoltaics…
In this work, first principle calculations of Cu$_2$ZnSnS$_4$ (CZTS), Cu$_2$ZnGeS$_4$ (CZGS) and Cu$_2$ZnSiS$_4$ (CZSS) are performed to highlight the impact of the cationic substitution on the structural, electronic and optical properties…
Cu-based chalcogenides are promising materials for thin-film solar cells with more than 20% measured cell efficiency. Using first-principles calculations based on density functional theory, the optoelectronic properties of a group of…
Thin-film solar cells that are considered as the second generation of solar cells are known for their low cost and acceptable efficiency. In this technology, semiconductor layers with a thickness of micrometer are deposited on thick enough…
Cu added CdS films were synthesized using spin coating technique at different spin speeds for different time durations. Films were subsequently annealed at different temperatures for different time periods in air to crystallize the phase of…