Related papers: Physics-Based Modeling and Validation of 2D Schott…
In this article, a novel two-path model is proposed to quantitatively explain sub-threshold characteristics of back-gated Schottky barrier FETs (SB-FETs) from 2D channel materials. The model integrates the 'conventional' model for SB-FETs…
Reducing the contact resistance of field-effect transistors based on two-dimensional materials is one of the key improvements required to enable the integration of such transistors in an advanced semiconductor manufacturing process.…
We present a theoretical framework for the calculation of charge transport through nanowire-based Schottky-barrier field-effect transistors that is conceptually simple but still captures the relevant physical mechanisms of the transport…
Nanotransistors typically operate in far-from-equilibrium (FFE) conditions, that cannot be described neither by drift-diffusion, nor by purely ballistic models. In carbonbased nanotransistors, source and drain contacts are often…
The Schottky barrier of a metal-semiconductor junction is one of the key quantities affecting the charge transport in a transistor. The Schottky barrier height depends on several factors, such as work function difference, local atomic…
A new Schottky-gate Bipolar Mode Field Effect Transistor (SBMFET) is proposed and verified by two-dimensional simulation. Unlike in the case of conventional BMFET, which uses deep diffused p+-regions as the gate, the proposed device uses…
In this paper, we present experimental results and simulation data of an electrostatically doped and therefore voltage-programmable, planar, CMOS-compatible field-effect transistor (FET) structure. This planar device is based on our…
The two-dimensional transition metal dichalcogenides (TMDs) have been proposed as candidates for the channel material in future field effect transistor designs. The heterophase design which utilizes the metallic T- or T' phase of the TMD as…
Recently demonstrated metal-semiconductor heterojunctions with few-atom thickness show their promise as 2D Schottky contacts for future integrated circuits and nanoelectronics. The theory for 3D Schottky contacts, however, fails on these…
The cold source field-effect transistor (CSFET) is promising for reducing power dissipation in integrated circuits by engineering the density of states at the injecting source. Existing CSFET designs utilizing Dirac-source metals or…
Schottky barrier field-effect transistors (SBFETs) based on few and mono layer phosphorene are simulated by the non-equilibrium Green's function formalism. It is shown that scaling down the gate oxide thickness results in pronounced…
Contact resistance is a severe performance bottleneck for electronic devices based on two-dimensional layered (2D) semiconductors, whose contacts are Schottky rather than Ohmic. Although there is general consensus that the injection…
The metal-semiconductor contact is a major factor limiting the shrinking of transistor dimension to further increase device performance. In-plane edge contacts have the potential to achieve lower contact resistance due to stronger orbital…
By fabricating and characterizing multi-layered MoS$_2$-based field-effect transistors (FETs) in a four terminal configuration, we demonstrate that the two terminal-configurations tend to underestimate the carrier mobility $\mu$ due to the…
In this paper, we present the numerical analysis and simulations of a multi-dimensional memristive device model. Memristive devices and memtransistors based on two-dimensional (2D) materials have demonstrated promising potential for…
In this paper, we demonstrate by simulation the general usability of an electrostatically doped and electrically reconfigurable planar field-effect transistor (FET) structure. The device concept is partly based on our already published and…
We have studied the finite bias transport properties of a 2H-1T' MoS$_2$ lateral metal-semiconductor (M-S) junction by non-equilibrium Green's functions calculations, aimed at contacting the 2D channel in a field effect transistor. Our…
The potential barrier height at the interface formed by a metal contact and multiple one-dimensional (1D) quasi-ballistic channels in field-effect transistors (FETs) is evaluated across different carbon nanotube and nanowire device…
A new analytical model based on the WKB approximation for MOSFET-like one-dimensional ballistic transistors with Schottky-Barrier contacts has been developed for the drain current. By using a proper approximation of both the Fermi-Dirac…
We report the realization of field-effect transistors (FETs) made with chemically- synthesized layered two dimensional (2D) crystal semiconductor WS2. The 2D Schottky-barrier FETs demonstrate ambipolar behavior and a high (~105x) on/off…