Related papers: Isotropic plasma-thermal atomic layer etching of s…
Niobium nitride (NbN) is a metallic superconductor that is widely used for superconducting electronics due to its high transition temperature ($T_c$) and kinetic inductance. Processing-induced damage negatively affects the performance of…
We report the isotropic plasma atomic layer etching (ALE) of aluminum nitride using sequential exposures of SF$_6$ plasma and trimethylaluminum (Al(CH$_3$)$_3$, TMA). ALE was observed at temperatures greater than 200 $^\circ$C, with a…
Lithium niobate (LiNbO$_3$, LN) is a ferroelectric crystal of interest for integrated photonics owing to its large second-order optical nonlinearity and the ability to impart periodic poling via an external electric field. However, on-chip…
In the relentless pursuit of advancing semiconductor technologies, the demand for atomic layer processes has given rise to innovative processes, which have already played a significant role in the continued miniaturization features. Among…
On-chip photonic devices based on SiO$_2$ are of interest for applications such as microresonator gyroscopes and microwave sources. Although SiO$_2$ microdisk resonators have achieved quality factors exceeding one billion, this value…
This study presents a comprehensive investigation into the exceptional superconducting attributes of titanium nitride (TiN) achieved through plasma-enhanced atomic layer deposition (PEALD) on both planar and intricate three-dimensional (3D)…
Lithium niobate (LiNbO$_3$, LN) is a nonlinear optical material of high interest for integrated photonics with applications ranging from optical communications to quantum information processing. The performance of on-chip devices based on…
We report on the fabrication and characterization of superconducting coplanar waveguide (CPW) resonators based on titanium nitride (TiN) thin films deposited on 200\,mm diameter high-resistivity Si(100) substrates. We systematically…
The high frequency performance and yield of III-V semiconductor devices such as InP HEMTs is negatively impacted by subsurface etch damage and non-uniform etch depth over the wafer. Atomic layer etching (ALE) has the potential to overcome…
We report on the development and application of an atomic layer etching (ALE) procedure based on alternating exposures of trimethylaluminum and anhydrous hydrogen fluoride (HF) implemented to controllably etch aluminum oxide. Our ALE…
We investigate electron transport and phase-breaking processes in thin titanium nitride (TiN) films of epitaxial quality. Previous studies show that a minute surface magnetic disorder significantly reduces the critical temperature…
This work reports a pulsed laser-assisted synthesis, detailed structural characterization, and study of plasmonic properties of three sets of TiN/TiNO thin films with high electron density. The first two sets of TiN films were grown at 600C…
To integrate plasmonic devices into industry, it is essential to develop scalable and CMOS compatible plasmonic materials. In this work, we report high plasmonic quality titanium nitride (TiN) on c-plane sapphire by plasma enhanced atomic…
We report a novel method of growing strongly-disordered superconducting titanium nitride (TiN) thin films by reactive electron-beam deposition. The normal state sheet resistance and superconducting critical temperature (Tc) can be tuned by…
Titanium nitride is a material of interest for many superconducting devices such as nanowire microwave resonators and photon detectors. Thus, controlling the growth of TiN thin films with desirable properties is of high importance. In…
Superconductors, an essential class of functional materials, hold a vital position in both fundamental science and practical applications. However, most superconductors, including MgB$_2$, Bi$_2$Sr$_2$CaCu$_2$O$_{8+\delta}$, and FeSe, are…
The light output of deep ultraviolet (UV-C) AlGaN light-emitting diodes (LEDs) is limited due to their poor light extraction efficiency (LEE). To improve the LEE of AlGaN LEDs, we developed a fabrication technology to process AlGaN LEDs…
We present a method to systematically locate and extract capacitive and inductive losses in superconducting resonators at microwave frequencies by use of mixed-material, lumped element devices. In these devices, ultra-low loss titanium…
Scalable architectures characterized by quantum bits (qubits) with low error rates are essential to the development of a practical quantum computer. In the superconducting quantum computing implementation, understanding and minimizing…
This paper presents the fabrication and characterization of superconducting qubit components from titanium nitride (TiN) and aluminum nitride (AlN) layers to create Josephson junctions and superconducting resonators in an all-nitride…