Related papers: Wireless Data Link at 1Gbps using 256 QAM
Almost all the WiFi networks today provide single band (either 2.4 GHz or 5.8 GHz) wireless communication functionality for connected mobile nodes. In a single band network, the interference depends on number of nodes in the network and the…
A 60 GHz wireless Gigabit Ethernet (G.E.) communication system capable of near gigabit data rate has been developed at IETR. The realized system covers 2 GHz available bandwidth. This paper describes the design and realization of the…
WiMax is a promising network of today industry. It provides P2P and P2MP point to multipoint broadband services up to thirty miles. Its operational frequency range is 10 GHz to 60 GHz. It provides data rate of 75Mbps per channel; with an…
The demand for higher data rates in next-generation mobile wireless communication systems (6G) has led to significant interest in terahertz (THz) waves as a high-frequency, broad modulation bandwidth carrier wave. In this study, we propose…
We today live in the era of dynamic and mobile wireless enabled platforms. This kind of stringent communication capability in the face of volatile and turbulent mobility demands a fresh look at physical layer in general and antenna design…
Quantum-dash (QD) mode-locked laser diodes (MLLD) lend themselves as chip-scale frequency comb generators for highly scalable wavelength-division multiplexing (WDM) links in future data-center, campus-area, or metropolitan networks. Driven…
Advanced industrial applications for human-machine interaction such as augmented reality support for maintenance works or mobile control panels for operating production facility set high demands on underlying wireless connectivity solution.…
The proposed UWB antenna covers mobile communications (GSM, EDG, UMTS(3G), LTE(4G)) and wireless networks (WIFI, WiMAX), within a theoretical bandwidth defined from 780MHz to 4.22GHz. The UWB antenna is designed and realized on a FR-4…
High impedance connecting links and cables are modeled at low frequency in terms of their impedance to ground and to neigbouring connecting links. The impedance is usually considered to be the parallel combination of a resistance and a…
In this paper, we demonstrate a wavelength division multiplexing (WDM) based system for simultaneously delivering ultrastable optical frequency reference, 10 GHz microwave frequency reference, and one pulse per second (1 PPS) time signal…
With the ratification of the IEEE 802.15.3d amendment to the 802.15.3, a first step has been made to standardize consumer wireless communications in the sub-THz frequency band. The IEEE 802.15.3d offers switched point-to-point connectivity…
High speed wireless access on 60 GHz spectrum relies on high-gain directional antennas to overcome the severe signal attenuation. However, perfect alignment between transmitting and receiving antenna beams is rare in practice and overheard…
The next generation of wireless communications systems will employ new frequency bands such as those in the upper midband, millimeter-wave and sub-terahertz frequency bands. The high energy consumption of analog-to-digital converters…
We demonstrate a complete Silicon Photonics WDM link relying on a single section semiconductor mode-locked laser and a single SOA to support up to 12 multiplexed channels with a bit error rate of 1e-12 at serial data rates of 14 Gbps…
We present homogeneous quantum cascade lasers (QCLs) emitting around 3 THz which display bandwidths up to 950 GHz with a single stable beatnote. Devices are spontaneously operating in a harmonic comb state, and when in a dense mode regime…
We propose networking superconducting quantum circuits by transducing their excitations (typically 4-8 GHz) to 100-500 MHz photons for transmission via cryogenic coaxial cables. Counter-intuitively, this frequency downconversion reduces…
8-OAM modes each carrying 10 wavelengths with 2.56-Tbit/s aggregated capacity and 10.24-bit/s/Hz spectral efficiency have been transmitted over 50-km specially designed ring-core fiber, using a compact OAM mode sorter and only modular 4x4…
Next generation communication and sensing require enabling technologies for miniaturized and efficient heterogeneous systems while integrating technologies ranging from silicon to compound semiconductors and from photonic chips to…
In this work, we study bounds on the capacity of full-duplex Gaussian 1-2-1 networks with imperfect beamforming. In particular, different from the ideal 1-2-1 network model introduced in [1], in this model beamforming patterns result in…
Real-time applications require latencies on the order of a millisecond with very high reliabilities, paralleling the requirements for high-performance industrial control. Current wireless technologies like WiFi, Bluetooth, LTE, etc. are…