Related papers: Wireless Data Link at 1Gbps using 256 QAM

IEEE 802.15.4 standard is designed for low power and low data rate applications with high reliability. It operates in beacon enable and non-beacon enable modes. In this work, we analyze delay, throughput, load, and end-to-end delay of…

The present work consists of designing a Single Balanced Mixer(SBM) with the 65 nm CMOS technology, this for a 1.9 GHz RF channel, dedicated to wireless applications. This paper shows; the polarization chosen for this structure, models of…

Discrete multi-tone transmission (DMT) is a promising candidate for future 400G data center interconnects. Eight channels, each carrying 56 Gb/s of data can be combined in a 50-GHz channel grid to form a 400 Gb/s superchannel. For a fully…

The terahertz (THz) band, 0.1-10 THz, has sufficient resources not only to satisfy the 5G requirements of 10 Gbit/s peak data rate but to enable a number of tempting rate-greedy applications. However, the THz band brings novel challenges,…

Millimeter-wave (mmWave) frequency bands offer a new frontier for next-generation wireless networks, popularly known as 5G, to enable multi-gigabit communication; however, the availability and reliability of mmWave signals are significantly…

This paper explores the road to vastly improving the broadband connectivity in future 6G wireless systems. Different categories of use cases are considered, with peak data rates up to 1 Tbps. Several categories of enablers at the…

Millimeter wave (mmW) wireless networks are capable to support multi-gigabit data rates, by using directional communications with narrow beams. However, existing mmW communications standards are hindered by two problems: deafness and single…

Terahertz (THz) carrier frequencies (100 GHz to 10 THz) have been touted as a source for unprecedented wireless connectivity and high-precision sensing, courtesy of their wide bandwidth availability and small wavelengths, but noteworthy…

Wireless power transfer (WPT) technologies hold promise for enhancing device autonomy, particularly for energy-limited IoT systems. This paper presents experimental results on coherent and non-coherent transmit diversity approaches for WPT,…

Future wireless cellular networks will utilize millimeter-wave and sub-THz frequencies and deploy small-cell base stations to achieve data rates on the order of hundreds of Gigabits per second per user. The move to sub-THz frequencies will…

Quantum frequency conversion (QFC) is essential for bridging the spectral gap between stationary qubits and low-loss optical communication channels. In this work, we demonstrate a short-wavelength-pumping QFC with the first-order…

In high speed railways (HSRs) communication system, when a train travels along the railway with high velocity, the wireless channel between the train and base station varies strenuously, which makes it essential to implement appropriate…

In this paper, introduced below are the concepts of digital modulation used in many communication systems today. Techniques described include quadrature phase shift keying (QPSK) and quadrature amplitude modulation (QAM) and how these…

In this paper, we first propose a redundant radix based number (RBN) representation for encoding the data to be transmitted in a wireless network. This RBN encoding uses three possible values - 0, 1 and $\bar 1$, for each digit to be…

We experimentally demonstrate a 28-Gbaud 16-QAM self-homodyne digital radio-over- 33.6km-7-core-fiber system with entropy coding for mobile fronthaul, achieving error-free carrier aggregation of 330 100-MHz 4096-QAM 5G-new-radio channels…

We report a waveform-selective metasurface that operates at 2.4 GHz band, i.e. one of ISM (Industrial, Scientific and Medical) bands. This structure gives us an additional degree of freedom to control electromagnetic waves and absorbs a…

We report on a fully bi-directional 680~km fiber link connecting two cities for which the equipment, the set up and the characterization are managed for the first time by an industrial consortium. The link uses an active telecommunication…

This paper considers a multipair amplify-and-forward massive MIMO relaying system with one-bit ADCs and one-bit DACs at the relay. The channel state information is estimated via pilot training, and then utilized by the relay to perform…

This paper presents development and characterization of a 3.2 Gb/s serial link transmitter for CMOS image sensors. The transmitter incorporates Reed-Solomon code to achieve low error rate in the harsh environment of subatomic physics…

Large-scale multiple-antenna systems have been identified as a promising technology for the next generation of wireless systems. However, by scaling up the number of receive antennas the energy consumption will also increase. One possible…