Related papers: Plasma processes affecting etching and growth of n…
Oxygen-plasma pre-cleans are routine before fabrication, but on BaTiO3 thin films we observed catastrophic photoresist lift-off during mild rinsing and sonication. To explain the failure, we combined optical microscopy, EDS, and XPS. EDS…
Raman studies of nanocomposite SiCN thin film by sputtering showed that with an increase of substrate temperature from room temperature to 500oC, a transition from mostly sp2 graphitic phase to sp3 carbon took place which was observed from…
The cascaded production and dynamics of electron-positron plasma in ultimately focused laser fields of extreme intensity are studied by 3D particle-in-cell simulations with the account for the relevant processes of quantum electrodynamics…
A novel intense beam-driven scheme for high yield of the tri-alpha reaction 11B(p,{\alpha})2{\alpha} was investigated. We used a foam target made of cellulose triacetate (TAC, C_9H_{16}O_8) doped with boron. It was then heated…
We report the highest compression reached in laboratory plasmas using eight laser beams, E$_{laser}$$\approx$12 kJ, $\tau_{laser}$=2 ns in third harmonic on a CD$_2$ target at the ShenGuang-II Upgrade (SGII-Up) facility in Shanghai, China.…
In computer chip manufacturing, the study of etch patterns on silicon wafers, or metrology, occurs on the nano-scale and is therefore subject to large variation from small, yet significant, perturbations in the manufacturing environment. An…
The plasma density grating induced by intersecting intense laser pulses can be utilized as an optical compressors, polarizers, waveplates and photonic crystals for the manipulation of ultra-high-power laser pulses. However, the formation…
The scalable synthesis of two-dimensional (2D) hexagonal boron nitride (h-BN) is of great interest for its numerous applications in novel electronic devices. Highly-crystalline h-BN films, with single-crystal sizes up to hundreds of…
It is well known that when the fused silica is irradiated with focused femtosecond laser beams, space selective chemical etching can be achieved. The etching rate depends sensitively on the polarization of the laser. Surprisingly, we…
We have synthesized boron nitride nanotubes (BNNTs) in an arc in presence of boron and nitrogen species only, without transition metals. We find that BNNTs are often attached to pure boron nanoparticles, suggesting that root-growth is a…
Present work was aimed to investigate the effect of nitriding time; 1, 1.5, 2.5 & 3.5 h, on surface characteristics & mechanical properties (surface nano-hardness, hardness Vickers, and adhesion) of AISI M2 tool steel. Mechanically…
A digital etching method was proposed to achieve excellent control of etching depth. The digital etching characteristics of p+ Si and Si0.7Ge0.3 using the combinations of HNO3 oxidation and BOE oxide removal processes were studied.…
This study explores the properties of nanopowders synthesized under high-temperature, non-equilibrium conditions in a high-flux optical furnace in a nitrogen flow. Boron powders served as the starting material, and the intense thermal…
Aneutronic and nonradioactive properties make the proton-boron fusion a prospective candidate for fusion energy production through reactions following p+$^{11}$B$\rightarrow$3${\alpha}$ (p-$^{11}$B). However, it is difficult to achieve a…
Organic scintillators doped with capture agents provide a detectable signal for neutrons over a broad energy range. This work characterizes the fast and slow neutron response of EJ-254, an organic plastic scintillator with 5% natural boron…
Non-linear absorption phenomena induced by controlled irradiation with a femtosecond laser beam can be used to tailor materials properties within the bulk of substrates. One of the most successful applications of this technique is the…
We report that epitaxial Sr2IrO4 thin-films can be selectively grown using pulsed laser deposition (PLD). Due to the competition between the Ruddlesden-Popper phases of strontium iridates (Sr_{n+1}Ir_{n}O_{3n+1}), conventional PLD methods…
We present an in-depth analysis of the energy dependence of optical breakdown in water by tightly focused laser pulses, from plasma formation to shock waves and cavitation. Laser pulses of fs to ns durations and UV to IR wavelengths are…
Oxynitrides are used in a variety of applications including photocatalysts, high-k dielectrics or wear-resistant coatings and often show intriguing multi-functionality. To accelerate the co-optimization of the relevant material properties…
Pulsed-laser dry printing of noble-metal microrings with a tunable internal porous structure, which can be revealed via an ion-beam etching post-procedure, was demonstrated. Abundance and average size of the pores inside the microrings were…