Related papers: Microstructure evolution and mechanical behavior o…
Electrical iron silicon steel is the most commonly used soft magnetic material in electrical energy conversion and transmission, and its demand is expected to increase with the need for electrification of the transportation sector and the…
A 10 wt.% nickel-steel has been developed for high pressures and low-temperature applications, due to its high strength, excellent toughness, and low ductile-to-brittle transition temperature (DBTT). Under dynamic loading conditions this…
The response of metals and their microstructures under extreme dynamic conditions can be markedly different from that under quasistatic conditions. Traditionally, high strain rates and shock stresses are measured using cumbersome and…
We investigate the effect of the microstructure on the mechanical response of lattice structures made of a defect tolerant Ti-14 Mo binary alloy fabricated by Electron Powder Bed Fusion. Some of the lattice structures were subjected to…
The microstructure of Mg-Al-Ca alloys consists of a hard intra- and intergranular eutectic Laves phase network embedded in a soft $\alpha$-Mg matrix. For such heterogeneous microstructures, the mechanical response and co-deformation of both…
Conventional drying of colloidal materials and gels (including cement) can lead to detrimental effects due to the buildup of internal stresses as water evaporates from the nano/microscopic pores. However, the underlying nanoscopic…
Digital image correlation of laser-ablated platinum nanoparticles on the surface of a polycrystalline metal (nickel-based superalloy Rene 88DT) was used to obtain the local strain behavior from an in situ scanning electron microscope…
A clear understanding of the dynamic behavior of metals is critical for developing superior structural materials as well as for improving material processing techniques such as cold spray and shot peening. Using a high velocity (from 120…
Nanostructures have the immense potential to supplant the traditional metallic structure as they show enhanced mechanical properties through strain hardening. In this paper, the effect of grain size on the hardening mechanism of Al-Cu…
Magnesium alloys are emerging as promising alternatives to traditional orthopedic implant materials thanks to their biodegradability, biocompatibility, and impressive mechanical characteristics. However, their rapid in-vivo degradation…
The thermal decomposition behavior, the microstructural evolution and its influence on the mechanical properties of a supersaturated Cu Co solid solution with ~100 nm average grain size prepared by severe plastic deformation is investigated…
Two ingots weighing 400 g and 5 kg with nominal compositions of Fe-8Mn-4Al-2Si-0.5C-0.07V-0.05Sn were produced to investigate the effect of processing variables on microstructure development. The larger casting has a cooling rate more…
The growth rates and chemical ordering of ferroelectric alloys are studied with kinetic Monte Carlo (KMC) simulations using an electrostatic model with long-range Coulomb interactions, as a function of temperature, chemical composition, and…
The search for effective methods to fabricate bulk single-phase quasicrystalline Al-Cu-Fe alloys is currently an important task. Crucial to solving this problem is to understand mechanisms of phase formation in this system. Here we study…
Advanced nanodevices require high-precision machining of thin films using ultrafast lasers. However, thin-film fabrications cause variations in microstructure, crystallographic orientation, and residual stresses owing to coating conditions…
To assess long-term structural integrity under operational conditions in nuclear reactors, SS 316LN with varying nitrogen content is subjected to thermal aging for 20000 hours at 650{\deg}C. While the annealing twins and heterogeneous grain…
Strain heterogeneity at the microstructural level plays a vital role in the deformation and fracture behaviour of dual or multi-phase materials. In the present work, the strain heterogeneity, localization and partitioning arising at the…
Thermal fatigue is a common failure mode in electronic solder joints, yet the role of microstructure is incompletely understood. Here, we quantify the evolution of microstructure and damage in Sn-3Ag-0.5Cu joints throughout a ball grid…
Achieving a combination of high mechanical strength and high electrical conductivity in low-weight Al alloys requires a full understanding of the relationships between nanoscaled features and physical properties. Grain boundary…
Ageing mechanisms of the U-5\,\%wtNb system have been investigated on samples exposed to temperatures of 150$\,^{\circ}$C for up to 5000\,hours. A variety of surface and bulk analytic techniques have been used to investigate phase, chemical…