Related papers: Microstructure evolution and mechanical behavior o…
A complex study of aging kinetics for both coarse-grained and nanostructured by severe plastic deformation Cu -- 2 wt% Be alloy is reported. It is shown that aging of a coarse-grained alloy leads to continuous formation of nanosized CuBe…
Additively manufactured high strength aluminium alloy AA7075 was prepared using selective laser melting. High strength aluminium alloys prepared by selective laser melting have not been widely studied to date. The evolution of…
Further property enhancement of alnico, an attractive near-term, non-rare-earth permanent magnet alloy system, primarily composed of Al, Ni, Co, and Fe, relies on improved morphology control and size refinement of its complex spinodally…
Ti$_{1-x-y}$Al$_{x}$Zr$_{y}$N cubic alloys within the 25-70\% Al composition range have high age-hardening capabilities due to metastable phase transition pathways at high temperatures. They are thus ideal candidates for ultra-hard…
Development of high strength carbon fibers (CFs) requires an understanding of the relationship between the processing conditions, microstructure and resulting properties. We developed a molecular model that combines kinetic Monte Carlo…
This work investigated the effects of aging heat treatments on the microstructure and, consequently, the quasi-static (tensile properties) and dynamic (impact toughness) mechanical behaviour of a 17-4 PH stainless steel produced by powder…
A novel medium Mn steel of composition Fe-12Mn-4.8Al-2Si-0.32C-0.3V was manufactured with 1.09 GPa yield strength, 1.26 GPa tensile strength and 54% elongation. The thermomechanical process route was designed to be industrially translatable…
In this work, we investigate the sensitivity of the microstructure and mechanical properties of an ultrafast heat treated low carbon-steel to the peak temperature. In all studied cases, the steel was heated within the intercritical…
Ultrafine-grained aluminum alloys offer interesting multifunctional properties with a combination of high strength, low electrical resistivity, and low density. However, due to thermally induced grain coarsening, they typically suffer from…
In this study atom probe tomography was used to investigate the microstructure of AA2198 (Al-1.35Cu-3.55Li-0.29Mg-0.08Ag) over a range of ageing conditions to examine the evolution of phases in the alloy, in particular aiming to reveal the…
The mechanism of the evolution of the deformed microstructure at the earliest stage of annealing where the existence of the lowest length scale substructure paves the way to the formation of the so-called subgrains, has been studied for the…
Superplastic behavior of ultrafine-grained (UFG) Al-6Mg-0.12Sc-0.10Zr-0.1X alloys, where X = Yb (Alloy #1-Yb), Er (Alloy #2-Er), and Hf (Alloy #3-Hf), has been studied. The total content of Sc, Zr, Yb, Er, Hf in the alloys was 0.32 wt.%…
Novel multicaloric cooling utilizing the giant caloric response of Ni-Mn-based metamagnetic shape-memory alloys to different external stimuli such as magnetic field, uniaxial stress and hydrostatic pressure is a promising candidate for…
The details of phase separation of a Ni-6.5Al-9.9Mo aged at 978 K for aging times ranging from 0.125 to 1024 h are investigated by atom-probe tomography and lattice-kinetic Monte Carlo (LKMC) simulations. On the basis of the temporal…
The Fe-Mn-based alloys are receiving immense attention due to their applications in the third generation of advanced high-strength steels, owing to their high strength and ductility. A detailed in situ high-pressure structural phase…
Applied magnetic fields can alter phase equilibria and kinetics in steels; however, quantitatively resolving how magnetic, chemical, and elastic driving forces jointly influence the microstructure remains challenging. We develop a…
The superconducting and magnetic properties of phase-separated A$_x$Fe$_{2-y}$Se$_2$ compounds are known to depend on post-growth heat treatments and cooling profiles. This paper focusses on the evolution of microstructure on annealing, and…
The out-of-equilibrium heterogeneous microstructure typical of AlSi10Mg processed by Laser Powder Bed Fusion (LPBF) is often modified by further heat treatment to improve its ductility. According to literature, extensive experimental…
The article focuses on the effect of alloying and microstructure on formability of advanced high strength steels (AHSSs) processed via quenching and partitioning (Q&P). Three different Q&P steels with different combination of alloying…
We study a cast Mg-4.65Al-2.82Ca alloy with a microstructure containing $\alpha$-Mg matrix reinforced with a C36 Laves phase skeleton. Such ternary alloys are targeted for elevated temperature applications in automotive engines since they…