Related papers: Microstructure evolution and mechanical behavior o…
The Ni-Mn-based shape memory alloys as a promising candidate of elastocaloric material has been reported in many literatures, especially on bulk samples. The as-spun ribbon, which has a larger surface area and is more efficient for heat…
Carbides play a central role for the strength and ductility in many materials. Simulating the impact of these precipitates on the mechanical performance requires the knowledge about their atomic configuration. In particular, the C content…
This work demonstrates the development of a strong and ductile medium entropy alloy by employing conventional alloying and thermomechanical processing to induce partial recrystallization (PR) and precipitation strengthening in the…
We present an original approach for predicting the static recrystallization texture development during annealing of deformed crystalline materials. The microstructure is considered as a population of subgrains and grains whose sizes and…
This study addresses microstructure selection mechanisms in rapid solidification, specifically targeting the transition from cellular/dendritic to planar interface morphologies under conditions relevant to additive manufacturing. We use a…
A large body of literature within the additive manufacturing (AM) community has focused on successfully creating stable tungsten (W) microstructures due to significant interest in its application for extreme environments. However,…
Liquid-metal infiltrated Cu30Mo70 (weigth percentage) is subjected to severe plastic deformation using high pressure torsion. The initially equiaxed dual phase structure is gradually transformed into a lamellar structure composed of…
The Laves phase skeleton in cast Mg-Al-Ca alloys is known to provide considerable strengthening. Laves phases such as CaMg$_2$ (C14), Ca(Al,Mg)$_2$ (C36), and CaAl2 (C15) have high melting points, high hardness at room and elevated…
Initial powder mixtures of Cu, Fe and Co are exposed to severe plastic deformation by high-pressure torsion to prepare solid solutions. A broad range of compositions is investigated, whereas this study aims at the synthesis of soft magnetic…
High strength steels are susceptible to H-induced failure, which is typically caused by the presence of diffusible H in the microstructure. The diffusivity of H in austenitic steels with fcc crystal structure is slow. The austenitic steels…
Transition metal aluminum nitrides are a technologically important class of multifunctional ceramics, however, the HfAlN system remains largely unexplored. We investigate phase stability, nanostructure design, and mechanical behavior of…
The microstructural characteristics of a single crystalline nickel based superalloy (AM1) tested under high temperature fatigue at 950$^\circ$C are reported. For repeated fatigue (R$_\varepsilon$=0) through a range of cycle numbers N with…
Recent studies of FeMnCoCr-based high entropy alloys have demonstrated uncommon deformation behaviors such as transformation-induced plasticity, which were largely believed to be restricted to select families of steels. Coupled with the…
Samples of $\alpha$-SiC have been sintered with liquid phase (LPS) to 1950 $^\circ$C, in atmosphere of argon and processing times between 1 and 7 hours. Using scanning electron microscopy (SEM) the microstructure of the samples has been…
The High Nitrogen Martensitic Stainless Steel (HNMS) was subjected to three different austenitizing cycles of 1050$^\circ$C, 1075$^\circ$C and 1100$^\circ$C followed by subzero treatment at -70$^\circ$C. The fraction of retained austenite…
Uncovering microstructure evolution mechanisms that accompany the long-term operation of solid oxide fuel cells is a fundamental challenge in designing a more durable energy system for the future. To date, the study of fuel cell stack…
The microstructural development in H13 tool steel upon nitriding by an ion beam process was investigated. The nitriding experiments were performed at a relatively low temperature of about 400\deg C and at constant ion beam energy (400 eV)…
This study investigates the substitution of cerium (Ce) with mischmetal (MM) in cast Al-MM alloys, focusing on microstructure, hardness, tensile and compression properties, creep resistance, and coarsening resistance. Al-MM alloys with…
Nanocrystalline materials are well known for their beneficial mechanical and physical properties. However, it is of utmost importance to stabilize the microstructure at elevated temperatures to broaden the window of application e.g. by…
With decreasing system sizes, the mechanical properties and dominant deformation mechanisms of metals change. For larger scales, bulk behavior is observed that is characterized by a preservation and significant increase of dislocation…