Related papers: Comprehensive TCAD Simulation Study of High Voltag…

More than 3 kV breakdown voltage was demonstrated in monolithic bidirectional GaN HEMTs for the first time having potential applications in 1200V or 1700V-class novel power converters. The on resistance of the fabricated transistors was ~20…

High Electron Mobility Transistors (HEMTs) are most suitable for harsh environments as they operate reliably under extreme conditions such as high voltages, high temperatures, radiation exposure and corrosive atmospheres. In this article,…

A dual-channel AlN/GaN high electron mobility transistor (HEMT) architecture is demonstrated that leverages ultra-thin epitaxial layers to suppress surface-state related gate lag. Two high-density two-dimensional electron gas (2DEG)…

This paper presents an analysis of GaN high-electron-mobility transistors (HEMTs) using both TCAD simulation and experimental characterization. The energy band structure was studied using Nextnano simulation software to observe…

High voltage (~2 kV) AlGaN-channel HEMTs were fabricated with 64% Aluminum composition in the channel. The average on-resistance was ~75 ohm. mm (~21 miliohm. cm^2) for LGD = 20 microns. Breakdown voltage reached >3 kV (tool limit) before…

In this letter, we report the operation of AlGaN/GaN HEMTs with Pd gates in air over a wide temperature range from 22$^\circ$C to 500$^\circ$C. The variation in the threshold voltage ($V_{th}$) is less than 1$\%$ over the entire temperature…

In this letter, we report on a unique device design strategy for increasing the breakdown voltage and hence Baliga Figure of Merit (BFOM) of III-nitride HEMTs by engineering the gate edge towards the drain. The breakdown of such devices…

We report on the potential of high electron mobility transistors (HEMTs) consisting of high composition AlGaN channel and barrier layers for power switching applications. Detailed 2D simulations show that threshold voltages in excess of 3 V…

Short-term reliability and robustness of 110 nm AlN/GaN HEMTs has been evaluated by means of off-state, semi-on state and on-state step stress tests on devices having different gate-drain distance, LGD. While breakdown voltages and critical…

We present a novel p-GaN gate HEMT structure with reduced hole concentration near the Schottky interface by doping engineering in MOCVD, which aims at lowering the electric field across the gate. By employing an additional unintentionally…

GaN high electron mobility transistors (HEMT) have gained some foothold in the power electronics industry due to wide frequency bandwidth and power handling. The material offers a wide bandgap and higher critical field strength compared to…

A dual-channel AlN/GaN/AlN/GaN high electron mobility transistor (HEMT) architecture is proposed, simulated, and demonstrated that suppresses gate lag due to surface-originated trapped charge. Dual two-dimensional electron gas (2DEG)…

We report on the design, fabrication, and characterization of all MOCVD-grown long-gate AlScN/GaN metal-insulator-semiconductor high electron mobility transistors (MIS-HEMTs) on semi-insulating GaN substrates. Devices with a gate length of…

In this work, AlGaN/GaN HEMTs with dual-layer SiNx stressors (composed of a low-stress layer and a high-stress layer) were investigated. The low-stress padding layer solved the surface damage problem caused during the deposition of the…

We report on the demonstration of a deep sub-micron normally-off AlGaN/GaN HEMT with high on-current and high threshold voltage (VTH). The high-performance device was realized by utilizing a gate recess with length and depth of 200 nm and…

This study demonstrates 3D monolithic integration of amorphous indium-gallium-zinc oxide (a-IGZO) thin-film transistors (TFTs) on Gallium Nitride (GaN) high electron mobility transistors (HEMTs) in a cascode configuration, achieving high…

The potential barrier between source and gate in HEMTs and between source and channel in MOSFET controls the current output and the velocity injection of electrons in the channel [1], [2]. In non self aligned structures the electric field…

An analysis of recent experimental data for high-performance In0.7Ga0.3As high electron mobility transistors (HEMTs) is presented. Using a fully quantum mechanical, ballistic model, we simulate In0.7Ga0.3As HEMTs with gate lengths of LG =…

Despite considerable advancements, high electron mobility transistors (HEMTs) based on gallium nitride (GaN) channels remain largely limited to power applications below 650 V. For higher power demands, the ultra-wide bandgap semiconductor…

In this work, single-layer intrinsic and fluorinated graphene were investigated as gate insertion layers in normally-OFF p-GaN gate HEMTs, which wraps around the bottom of the gate forming Ti/graphene/p-GaN at the bottom and Ti/graphene/…