Related papers: Boron-related defects in n-type 4H-SiC Schottky ba…

The electrical behavior of Ni Schottky barrier formed onto heavily doped (ND>1019 cm-3) n-type phosphorous implanted silicon carbide (4H-SiC) was investigated, with a focus on the current transport mechanisms in both forward and reverse…

600V/20A 4H-SiC Schottky barrier diodes (SBD) were fabricated to investigate the effect of key processing steps, especially before and after a formation of Schottky contact, on the electrical performances of SBD and on a long-term…

We report findings on the Ion Beam Induced Charge (IBIC) characterization of a 4H-SiC Schottky barrier diode (SBD), in terms of the modification of the Charge Collection Efficiency (CCE) distribution induced by 20 MeV C ions irradiations…

An aluminum nitride (AlN) Schottky barrier diode (SBD) was fabricated on a nonpolar AlN crystal grown on tungsten substrate by physical vapor transport. The Ni/Au-AlN SBD features a low ideality factor n of 3.3 and an effective Schottky…

This letter reports the demonstration of lateral AlN Schottky barrier diodes (SBDs) on single-crystal AlN substrates by metalorganic chemical vapor deposition (MOCVD) with an ultra-low ideality factor ({\eta}) of 1.65, a breakdown voltage…

Due to the chemical inertness of 2D hexagonal-Boron Nitride (h-BN), few atomic-layer h-BN is often used to encapsulate air-sensitive 2D crystals such as Black Phosphorus (BP). However, the effects of h-BN on Schottky barrier height, doping…

Diamond, a wide band-gap semiconductor, can be engineered to exhibit superconductivity when doped heavily with boron. The phenomena has been demonstrated in samples grown by chemical vapour deposition where the boron concentration exceeds…

Cubic boron nitride (cBN) is an ultra-wide bandgap, super-hard material with potential for extreme-temperature and -pressure applications. A proof-of-principle p-n junction using cBN was demonstrated almost three decades ago. However, to…

We report on the fabrication and temperature-dependent characterization of MOCVD-grown quasi-vertical AlN Schottky barrier diodes (SBDs) on bulk AlN substrates. The SBDs exhibited high current densities exceeding 2 kA/cm2 at 10 V, with a…

Monolayer hexagonal boron nitride (hBN) has recently become the focus of intense research as a material to host quantum emitters. Although it is well known that such emission is associated with point defects, so far no conclusive…

The Schottky diode, BN/GaN layered composite contacting to bulk aluminum, is theoretically plausible to harvest wireless energy above X-band. According to our first principle calculation, the insertion of GaN layers dramatically influences…

Secondary Ions Mass Spectroscopy and Hall effect measurements were performed on boron doped silicon with concentration between 0.02 at.% and 12 at.%. Ultra-high boron doping was made by saturating the chemisorption sites of a Si wafer with…

The electrical characteristics and microstructures of $\beta$-Ga$_2$O$_3$ Schottky barrier diode (SBD) devices irradiated with swift heavy ions (2096 MeV Ta ions) have been studied. It was found that $\beta$-Ga$_2$O$_3$ SBD devices showed…

Superconducting boron-doped silicon films prepared by gas immersion laser doping (GILD) technique are analyzed by atom probe tomography. The resulting three-dimensional chemical composition reveals that boron atoms are incorporated into…

In this letter, we demonstrate high-performance lateral AlGaN/GaN Schottky barrier diodes (SBD) on Si substrate with a recessed-anode structure. The optimized rapid etch process provides results in improving etching quality with a 0.26-nm…

This work demonstrates quasi-vertical beta-Ga2O3 Schottky barrier diodes (SBDs) fabricated on c-plane sapphire using an all-LPCVD, plasma-free process integrating epitaxial growth of high-quality beta-Ga2O3 and in-situ Ga-assisted etching.…

Abstract Despite advances toward improving the quality of $p$-type 4H-SiC substrates and layers, we still have no model capable of accounting for the multitude of boron-related optical, junction, and paramagnetic resonance experiments…

In the last two decades we have assisted to a rush towards finding a He3-replacing technology capable of detecting neutrons emitted from fissile isotopes. The demand stems from applications like nuclear war-head screening or preventing…

Ga2O3 Schottky barrier diodes featuring a field plate and a composite SiO2/SiNx dielectric layer beneath the field plate were fabricated, achieving a breakdown voltage of 2.4 kV at room temperature. Electrical performance and degradation…

Boron (B) has the potential for generating an intermediate band in cubic silicon carbide (3C-SiC), turning this material into a highly efficient absorber for single-junction solar cells. The formation of a delocalized band demands high…