Related papers: A High-resolution Clock Phase Shifter Circuitry fo…

We present a Time-to-Digital Converter (TDC) implemented on a 16 nm Xilinx UltraScale Plus FPGA that achieves a resolution of 1.15 ps, RMS precision of 3.38 ps, a differential nonlinearity (DNL) of [-0.43, 0.24] LSB, and an integral…

The precise analysis and accurate measurement of harmonic provides a reliable scientific industrial application. However, the high-performance DSP processor is the important method of electrical harmonic analysis. Hence, in this research…

High-resolution astronomical spectroscopy carried out with a photonic Fourier transform spectrograph (FTS) requires long asymmetrical optical delay lines that can be dynamically tuned. For example, to achieve a spectral resolution of R =…

Optical clocks with unprecedented accuracy of 10^(-18) will lead to innovations in many research areas. All the applications of optical clocks rely on the ability of precisely converting the frequency from one optical clock to another, or…

We examine energy level-crossings of fine-structure (FS) levels in the heavier highly charged ions (HCIs) with $d^6$ and $d^8$ configurations. From the analysis, we find that some of these HCIs are tailor-made for atomic clocks with quality…

This paper presents the design and characterization of a monolithic integrated circuit (IC) including digital silicon photomultipliers (dSiPMs) arranged in a 32$~\times~$32 pixel matrix at 70$~\mu$m pitch. The IC provides per-quadrant time…

We develop a compact four-port superconducting switch with a tunable operating frequency in the range of 4.8 GHz -- 7.3 GHz. Isolation between channel exceeds 20~dB over a bandwidth of several hundred megahertz, exceeding 40 dB at some…

We report the generation of five phase-locked harmonics, f_1: 2403 nm, f_2: 1201 nm, f_3: 801 nm, f_4: 600 nm, and f_5: 480 nm with an exact frequency ratio of 1 : 2 : 3 : 4 : 5 by implementing a divide-by-three optical-frequency divider in…

A new linac using superconducting quarter-wave resonators (QWR) is under construction at CERN in the framework of the HIE-ISOLDE project. The QWRs are made of niobium sputtered on a bulk copper substrate. The working frequency at 4.5 K is…

.On the basis of requirement of CSNS, we designed a TDC chip with temperature compensation function in this paper, which employed TSMC 180nm process. Using delay unit bufx8 as the major method, delay lines in each level delayed input signal…

The need for wireless communication has driven the communication systems to high performance. However, the main bottleneck that affects the communication capability is the Fast Fourier Transform (FFT), which is the core of most modulators.…

We report on the development and phase noise performance of a 9.1926 GHz microwave frequency synthesizer to be used as the local oscillator for a Cs fountain clock. It is based on frequency multiplication and synthesis from an ultralow…

The LCLS-II RF system physically spans ~700m and has strict requirements -- on the order of 20 fs -- on the phase stability of the accelerating RF fields in its SRF linac. While each LLRF rack is crudely temperature-stabilized, the weather…

We demonstrate an optomechanical phase shifter. By electrostatically deflecting the nanofabricated mechanical structure, the effective index of a nearby waveguide is changed and the resulting phase shift is measured using an integrated…

A highly integrated, high performance, and re-configurable device, which is designed for the Nitrogen-Vacancy center based quantum applications, is reported. The digital compartment of the device is fully implemented in a…

The absolute frequency of the 1S0-3P0 clock transition of 87Sr has been measured to be 429 228 004 229 873.65 (37) Hz using lattice-confined atoms, where the fractional uncertainty of 8.6x10-16 represents one of the most accurate…

Multi-phase injection-locked ring oscillators (MP-ILROs) are widely used for multi-phase clock generation, with their phase accuracy primarily determined by the inherent accuracy of the oscillator itself, due to the suppression of input…

A frequency stabilized laser referenced to an unperturbed atomic two level system acts as the most accurate clock with femtosecond clock ticks. For any meaningful use, a Femtosecond Laser Frequency Comb (FLFC) is used to transfer the atomic…

In this research, we developed a low-power silicon photonics foundry-fabricated slow-light thermal phase shifter (SLTPS) where the slow-light (SL) effect is achieved using an integrated Bragg grating (BG) waveguide. Heating the grating…

We present a new evaluation of an 87Sr optical lattice clock using spin polarized atoms. The frequency of the 1S0-3P0 clock transition is found to be 429 228 004 229 873.6 Hz with a fractional accuracy of 2.6 10^{-15}, a value that is…