Related papers: Sub-1ms Instinctual Interference Adaptive GaN LNA …
This paper presents a low-noise amplifier (LNA) that was developed for a new radio telescope comprised of 512 parabolic dish antennas. The LNA closely interfaces to a custom-made antenna feed with an impedance co-designed to provide noise…
This paper presents the analysis, design, fabrication, and measurement of an integrated low-noise amplifier (LNA) implemented using a 130 nm CMOS technology, operating in the 2.4 GHz band. The LNA is a crucial component in the performance…
A Low-Power Variable Gain (VG) mm-Wave Low Noise Amplifier (LNA) is designed and simulated in a 28-nm CMOS process. The LNA utilizes a simple, yet novel, technique presented in this paper to vary the small-signal output resistance to…
Next-generation cellular systems require low-power mm-wave phased-array ICs. Variable-gain LNAs (VG-LNAs) are key blocks enabling reduced hardware complexity, performance improvement and added functionalities. This paper reports a low-power…
This paper presents a low power, low cost transceiver architecture to implement radar-on-a-chip. The transceiver comprises of a full ultra-wideband (UWB) transmitter and a full UWB band receiver. A design methodology to maximize the tuning…
Noise level frequently set the basic limit on the smallest signal. New noise reduction technology and amplifiers voltage-noise density, yet still offer high speed, high accuracy, and low power solution. Low noise amplifiers always play a…
Next-generation (5G/6G) wireless systems demand low-power mm-wave phased-array ICs. Variable-gain LNAs (VGLNAs) are key building blocks enabling hardware complexity reduction, performance enhancement and functionality extension. This paper…
Power consumption is a key challenge in millimeter wave (mmWave) receiver front-ends, due to the need to support high dimensional antenna arrays at wide bandwidths. Recently, there has been considerable work in developing low-power…
As the Internet of Things (IOT) is growing rapidly, there is an emerging need to facilitate development of IOT devices in the design cycle while optimized performance is obtained in the field of operation. This paper develops…
This paper studies an architecture with digitally controllable gain and power consumption to mitigate the impact of process variations on CMOS low-noise amplifiers (LNAs). A \SI{130}{nm}, \SI{1.2}{V} LNA implementing the proposed…
Implementation cost and power consumption are two important considerations in modern wireless communications, particularly in large-scale multi-antenna systems where the number of individual radio-frequency (RF) chains may be significantly…
Emerging health-monitor applications, such as information transmission through multi-channel neural implants, image and video communication from inside the body etc., calls for ultra-low active power (<50${\mu}$W) high data-rate,…
In high-performance RF transceivers the thrust of has been on lower noise LNAs and high-power high-speed PAs. The performance trade-off has forced many solutions to have the LNA and PA on a separate die compared to the rest of baseband.…
Wearable on-body millimeter-wave (mmWave) radars can provide obstacle detection and guidance for visually impaired individuals. The antennas, being a crucial component of these systems, must be lightweight, flexible, low-cost, and compact.…
Achieving monolithic integration of passive acoustic wave devices, in particular RF filters, with active devices such as RF amplifiers and switches, is the optimal solution to meet the challenging communication requirements of mobile…
This study establishes a unified framework for interpreting dynamic capacitive responses in InGaN-based light-emitting diodes (LEDs) through forward-bias capacitance-voltage-frequency spectroscopy. A hybrid impedance model integrating…
We present a sensitive, tunable radio-frequency resonator designed to detect reactive changes in nanoelectronic devices down to dilution refrigerator temperatures. The resonator incorporates GaAs varicap diodes to allow electrical tuning of…
This study undertakes the theoretical design, CAD modeling, realization, and performance analysis of a microwave low-noise amplifier (LNA) which has been accurately developed for operation at 3.0 GHz (S-band). The objective of this research…
Adaptive impedance matching between antennas and radio frequency front-end modules is critical for maximizing power transmission efficiency in mobile communication systems. Conventional numerical and analytical methods struggle with a…
This paper demonstrates designing and developing of an Ultra-Low Noise Amplifier which should potentially increase the sensitivity of the existing Magnetic Resonance Imaging (MRI) systems. The Design of the LNA is fabricated and…