Related papers: Process Yield and Device Stability Improvement for…
Among all the properties required for the design of the next generation of PCM (density, heat capacity, thermal expansion, latent energy, volume change upon melting, corrosion rate, etc.) the thermal transport properties are by far the…
Metal anodes in high power source (HPS) devices erode during operation due to hydrogen outgassing and plasma formation, both of which are thermally driven phenomena generated by the electron beam impacting the anode s surface. This limits…
We identify a possible mechanism of the plasmon instabilities in periodically gated two-dimensional electron systems with a modulated electron density (plasmonic crystals) under direct current. The instability occurs due to the amplified…
An investigation of the multi-hundred MeV electron beam yield (charge) form helium, nitrogen, neon and argon gas jet plasmas in a laser-plasma wakefield acceleration experiment was carried out. The charge measurement has been made via…
We report on a device to electronically stabilize the optical injection lock of a semiconductor diode laser. Our technique uses as discriminator the peak height of the laser's transmission signal on a scanning Fabry-Perot cavity and feeds…
In this paper, a novel approach based on robust stability concepts and tools is introduced to evaluate the unconditional stability of microwave active $\textit{n}$-port devices. An efficient calculation of the Structured Singular Value of…
Atmospheric water vapor causes significant undesired phase fluctuations for the Submillimeter Array (SMA) interferometer, particularly in its highest frequency observing band of 690 GHz. One proposed solution to this atmospheric effect is…
Whispering gallery mode (WGM) microcavities can confine photons within a microscale volume for long periods of time, strongly enhancing light-matter interactions, and making it a crucial platform in optical science and applications. Current…
We present a new theoretical model for the analytical prediction of the metal pad roll instability in idealised aluminium reduction cells consisting of two stably stratified liquid layers, which carry a vertical electric current and are…
We report Beta-AlGaO/Ga2O3 tri-gate heterostructure MOSHEMTs incorporating a thin 5 nm Al2O3 gate oxide layer for improved gate control and reduced leakage. The devices were fabricated on AlGaO/GaO heterostructures grown by ozone MBE on…
We describe a sensor for the measurement of thin dielectric layers capable of operation in a variety of environments. The sensor is obtained by microfabricating a capacitor with interleaved aluminum fingers, exposed to the dielectric to be…
Thermal stability of hydrogenated amorphous Si/Ge multilayers has been investigated by Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) and Small-Angle X-Ray Diffraction (SAXRD) techniques. Amorphous H-Si/Ge…
Metal-mediated exfoliation has been demonstrated as a promising approach for obtaining large-area flakes of 2D materials to fabricate prototypical nanoelectronics. However, several processing challenges related to organic contamination at…
In this paper, the stability analysis of an anaerobic digestion process is presented. The analysis is performed using a simplified mathematical model, which includes explicit temperature and pH dependence on kinetic growth rates. A detailed…
Achieving an optimal biomechanical environment within bone scaffolds is critical for promoting tissue regeneration, particularly in load-bearing anatomical sites where rigid fixation can induce stress shielding and compromise healing.…
When grid-forming (GFM) inverter-based resources (IBRs) face severe grid disturbances (e.g., short-circuit faults), the current limitation mechanism may be triggered. Consequently, the GFM IBRs enter the current-saturation mode, inducing…
Jamming is a common feature of out of equilibrium systems showing slow relaxation dynamics. Here we review our efforts in understanding jamming in granular materials using experiments and computer simulations. We first obtain an estimation…
We report on the development of some process capabilities for a polymer-based, multi-layer microelectrofluidic platform, namely: the hot embossing process, metallization on polymer and polymer bonding. Hot embossing experiments were…
We present a simulation study to characterize the stability region of the Fermilab (FNAL) Recycler in the context of secondary emission yield (SEY). Interactions between electrons and beam pipe material can produce electron clouds that…
Highly porous Pt/Al thin film electrodes on yttria stabilized zirconia electrolytes were prepared by dealloying of co-sputtered Pt/Al films. The oxygen reduction capability of the resulting electrodes was analyzed in a solid oxide fuel cell…