Related papers: Optimization of RF phase and beam loading distribu…
SPARC_LAB is a facility designed for the production of FEL radiation and the exploration of advanced acceleration techniques using a high brightness electron photo-injector. Specifically, particle-driven plasma wakefield acceleration (PWFA)…
Ultracold $^{87}$Rb atoms are delivered into a high-finesse optical micro-cavity using a translating optical lattice trap and detected via the cavity field. The atoms are loaded into an optical lattice from a magneto-optic trap (MOT) and…
Superconducting RF (SRF) photo-injectors are one of the most promising devices for generating continuous wave (CW) electron beams with record high brightness. Ultra-high vacuum of SRF guns provides for long lifetime of the high quantum…
Millimeter-wave (mmWave) communication is a promising technology to meet the ever-growing data traffic of vehicular communications. Unfortunately, more frequent channel estimations are required in this spectrum due to the narrow beams…
The Canadian Hydrogen Intensity Mapping Experiment (CHIME) is a novel transit radio telescope operating across the 400-800-MHz band. CHIME is comprised of four 20-m x 100-m semi-cylindrical paraboloid reflectors, each of which has 256…
In 2015, the LHCb experiment established a new and unique software trigger strategy with the purpose of increasing the purity of the signal events by applying the same algorithms online and offline. To achieve this, real-time calibration…
In the framework of the Compact Light XLS project, a short ultra-high gradient linearizer working on the third harmonic of the main LINAC frequency is requested. Increasing gradients and reducing dimensions are requirements for XLS and all…
We report on the SuperKEKB Phase I operations of the Large Angle Beamstrhalung Monitor (LABM). The detector is described and its performance characterized using the synchrotron radiation backgrounds from the last Beam Line magnets. The…
This paper reports a study of $B \to K^{*}\gamma$ decays using $62.8\pm 0.6$ fb$^{-1}$ of data collected during 2019--2020 by the Belle II experiment at the SuperKEKB $e^{+}e^{-}$ asymmetric-energy collider, corresponding to $(68.2 \pm 0.8)…
The LHCb detector optimised its performance in Runs~1 and~2 by stabilising the instantaneous luminosity during a fill. This was achieved by tuning the distance between the two colliding beams according to the measurement of instantaneous…
Exact 2D analytic expressions for E and B fields and their potentials created by a linear beam of relativistic charged particles between infinite perfectly conductive plates and ferromagnetic poles are derived. The solutions are obtained by…
Chapter 13 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in…
Numerical simulations have shown that the recently proposed "crab waist" scheme of beam-beam collisions can substantially boost the luminosity of existing and future electron-positron colliders. In this paper we describe the crab waist…
We report measurements of radiative B decays with K eta gamma final states, using a data sample of 140 /fb recorded at the Upsilon(4S) resonance with the Belle detector at the KEKB e+e- asymmetric energy collider. We observe B -> K eta…
We investigate phase shifts in the strong coupling regime of single-atom cavity quantum electrodynamics (QED). On the light transmitted through the system, we observe a phase shift associated with an antiresonance and show that both its…
The next generation of e+/e- colliders will require a very intense flux of gamma rays to allow high current polarized positrons to be produced. This can be achieved by converting polarized high energy photons in polarized pairs into a…
Beam commissioning of the SuperKEKB collider began in 2016. The Beam Exorcism for A STable experiment II (BEAST II) project is particularly designed to measure the beam backgrounds around the interaction point of the SuperKEKB collider for…
Advancements in 6G wireless technology have elevated the importance of beamforming, especially for attaining ultra-high data rates via millimeter-wave (mmWave) frequency deployment. Although promising, mmWave bands require substantial beam…
In current accelerators, numerous parameters and monitored values are to be adjusted and evaluated, respectively. In addition, fine adjustments are required to achieve the target performance. Therefore, the conventional…
Beam injections to KEKB and Photon Factory are performed with pulse-to-pulse modulation at 50 Hz. Three very different beams are switched every 20 ms in order to inject those beams into KEKB HER, LER and Photon Factory (PF) simultaneously.…