Related papers: Fully 3D-Printed Organic Electrochemical Transisto…
Organic light-emitting transistors (OLETs) are multifunctional optoelectronic devices that combine in a single structure the advantages of organic light emitting diodes (OLEDs) and organic field-effect transistors (OFETs). However, low…
Mass production of photonic integrated circuits requires high-throughput wafer-level testing. We demonstrate that optical probes equipped with 3D-printed elements allow for efficient coupling of light to etched facets of nanophotonic…
Fully exploiting the properties of 2D crystals requires a mass production method able to produce heterostructures of arbitrary complexity on any substrate, including plastic. Solution processing of graphene allows simple and low-cost…
A direct electronics printing technique through atomized spraying for patterning room temperature liquid metal droplets on desired substrate surfaces is proposed and experimentally demonstrated for the first time. This method has…
Despite widespread interest, ultrathin and highly flexible light-emitting devices that can be seamlessly integrated and used for flexible displays, wearables, and as bioimplants remain elusive. Organic light-emitting diodes (OLEDs) with…
Photonic components responsive to external optical stimuli are attracting increasing interest, because their properties can be manipulated by light with fast switching times, high spatial definition, and potentially remote control. These…
Electrochemical Biosensors are uniquely positioned to offer real-time in vivo molecular sensing due to their robustness to both biofluids and contaminants found in biofluids, and their adaptability for the detection of different analytes by…
Integrating all optical components of an optical coherence tomography (OCT) device into a single chip is a non-trivial and a challenging job. The design and development of such a lab-on-a chip will be possible only via…
Inorganic scintillators are widely used for scientific, industrial and medical applications. The development of 3D printing with inorganic scintillators would allow fast creation of detector prototypes for registration of ionizing…
Inkjet printing has been used to fabricate glucose sensors using glucose oxidase and screen printed carbon electrodes. By appropriate selection of printing and drying conditions we are able to fabricate sensor structures that show a good…
This study details the use of printing and other additive processes to fabricate a novel amperometric glucose sensor. The sensor was fabricated using a Au coated 12.7 micron polyimide film as a starting material, where micro-contact…
Modeling the electronic and optical properties of organic semiconductors remains a challenge for theory, despite the remarkable progress achieved in the last three decades. The complexity of these systems, including structural (dis)order…
Laser is one of the most important discoveries in the 20th century, and inorganic semiconductor lasers (ISCL) are most frequently used in many applications nowadays. Organic semiconductor lasers (OSCL) have many attractive features when…
Optical Coherence Tomography (OCT) enables the acquisition of high-resolution, three-dimensional fingerprint data, capturing rich subsurface structures for robust biometric recognition. However, the high cost and time-consuming nature of…
Wearable thermoelectric devices show promises to generate electricity in a ubiquitous, unintermittent and noiseless way for on-body applications. Three-dimensional thermoelectric textiles (TETs) outperform other types in smart textiles…
Polyetheretherketone (PEEK), as a semi-crystalline high-performance engineering plastic, has demonstrated good application prospects since its introduction. The ability of PEEK to be fabricated in complex architecture is a major limitation…
In this work it is reported a vertical electrolyte transistor (VET) whose structure is based on stacked layers as described below: bottom contact (source or drain) - channel - permeable intermediate electrode (drain or source) - ion gel…
Cell-based biosensors constitute a fundamental tool in biotechnology, and their relevance has greatly increased in recent years as a result of a surging demand for reduced animal testing and for high-throughput and cost-effective in vitro…
Paper is the ideal substrate for the development of flexible and environmentally sustainable ubiquitous electronic systems, which, combined with two-dimensional materials, could be exploited in many Internet-of-Things applications, ranging…
The next generation of soft electronics will expand to the third dimension. This will require the integration of mechanically-compliant three-dimensional functional structures with stretchable materials. This study demonstrates…