Related papers: An Improved PMOS-Based Low Dropout Regulator Desig…
In this article, we proposed a Variable threshold MOSFET(VTMOS)approach which is realized from Dynamic Threshold MOSFET(DTMOS), suitable for sub-threshold digital circuit operation. Basically the principle of sub- threshold logics is…
A widely embraced approach to mitigate the dynamic degradation in low-inertia power systems is to mimic generation response using grid-connected inverters to restore the grid's stiffness. In this paper, we seek to challenge this approach…
We consider the problem of voltage stability and reactive power balancing in islanded small-scale electrical networks outfitted with DC/AC inverters ("microgrids"). A droop-like voltage feedback controller is proposed which is quadratic in…
This paper presents a novel dissipativity-based distributed droop-free control approach for voltage regulation and current sharing in DC microgrids (MGs) comprised of an interconnected set of distributed generators (DGs), loads, and power…
In this paper, we investigate the transient stability of a state-of-the-art grid-forming complex-droop control (i.e., dispatchable virtual oscillator control, dVOC) under current saturation. We quantify the saturation level of a converter…
Monitoring the long term voltage stability of the power grid is necessary to ensure its secure operation. This paper presents a new phasor based methodology that distinguishes between long term voltage stability caused by distribution…
Impedance models are widely used in assessing small signal stability of grid-tied voltage source converter (VSC) systems. Recent research has proven that impedance models of grid-tied VSC in both dq and sequence domains are generally…
Low power oriented circuit optimization consists in selecting the best alternative between gate sizing, buffer insertion and logic structure transformation, for satisfying a delay constraint at minimum area cost. In this paper we used a…
The transient response of power grids to external disturbances influences their stable operation. This paper studies the effect of topology in linear time-invariant dynamics of different power grids. For a variety of objective functions, a…
Deep reinforcement learning approaches are becoming appealing for the design of nonlinear controllers for voltage control problems, but the lack of stability guarantees hinders their deployment in real-world scenarios. This paper constructs…
In this work passive electric damping of structural vibrations by distributed piezoelectric transducers and electric networks is analyzed. Different distributed electric controllers are examined as finite degrees of freedom systems and…
Direct Preference Optimization (DPO) has become a popular method for fine-tuning large language models (LLMs) due to its stability and simplicity. However, it is also known to be sensitive to noise in the data and prone to overfitting.…
Disturbance observer is an inner-loop output-feedback controller whose role is to reject external disturbances and to make the outer-loop baseline controller robust against plant's uncertainties. Therefore, the closed-loop system with the…
Production factories in which stable voltage is critical, e.g., electro-plating factory, require constantly stable voltage to minimize loss by adjusting incoming voltage in real time, even if low-quality electricity is supplied from…
This paper addresses stability issues of DC networks with constant power loads (CPL). Common DC networks, such as automotive electrical systems and DC microgrids, typically have a step-up/down converter connected in one side to the main bus…
As the CMOS technology enters nanometer scales, integrated circuits (ICs) become increasingly sensitive to radiation-induced soft errors, which can corrupt the state of storage elements and cause severe reliability issues. Many hardened…
The work of the miniature magneto-plasma compressor with the low-voltage power supply system was studied experimentally and the current and discharge voltage drop were measured. It was found that the voltage drop (a few tens of volts)…
We present a full review of PID passivity-based controllers (PBC) applied to power electronic converters, discussing limitations, unprecedented merits and potential improvements in terms of large-signal stability, robustness and…
A new topology optimization method called the Proportional Topology Optimization (PTO) is presented. As a non-gradient method, PTO is simple to understand, easy to implement, and is also efficient and accurate at the same time. It is…
ITER (International Thermonuclear Experimental Reactor) static magnetic field (SMF) test facility requires a DC power supply with low voltage, high current, and high stability. Due to the limitation ofswitching loss, there is a…