Related papers: Niobium to Titanium Electron Beam Welding for SRF …
We report a study of using the same material to fabricate a whispering gallery mode resonator and a coupler. Coupling to high Q whispering gallery modes of the lithium niobate resonator is demonstrated by means of the titanium-doped…
Niobium offers the benefit of increased operating temperatures and frequencies for Josephson junctions, which are the core component of superconducting devices. However existing niobium processes are limited by more complicated fabrication…
We present a novel transmon qubit fabrication technique that yields systematic improvements in T$_1$ relaxation times. We fabricate devices using an encapsulation strategy that involves passivating the surface of niobium and thereby…
We study superconducting stripline resonator (SSR) made of Niobium, which is integrated with a superconducting interference device (SQUID). The large nonlinear inductance of the SQUID gives rise to strong Kerr nonlinearity in the response…
Two superconducting quarter-wave resonator (QWR) prototypes have been fabricated and tested. They operate at 80.5 MHz and 161 MHz and are optimised for beta = 0.085 and beta = 0.16, respectively. The prototypes are simplified versions…
We report a simple method for the fabrication of Niobium superconducting (SC) tips for scanning tunnelling microscopy which allow atomic resolution. The tips, formed in-situ by the mechanical breaking of a niobium wire, reveal a clear SC…
Particle-producing targets in high-energy research facilities are often made from refractory metals, and they typically require dedicated cooling systems due to the challenging thermomechanical conditions they experience. However, direct…
This paper presents the fabrication and characterization of superconducting qubit components from titanium nitride (TiN) and aluminum nitride (AlN) layers to create Josephson junctions and superconducting resonators in an all-nitride…
The research of high energy and nuclear physics requires high power accelerators, and the superconducting radio-frequency (SRF) cavity is regarded as their engine. Up to now, the widely used practical and effective material for making the…
Superconducting (SC) tips for scanning tunneling microscopy (STM) can enhance a wide range of surface science studies because they offer exquisite energy resolution, allow the study of Josephson tunneling, or provide spatial contrast based…
Bulk niobium has long been the material of choice for superconducting radio-frequency applications. An alternative approach is the superconductor-insulator-superconductor multilayer structure, which enables the use of brittle high-$T_c$…
Nanoscale electromechanical coupling provides a unique route towards control of mechanical motions and microwave fields in superconducting cavity electromechanical devices. Though their successes in utilizing the optomechanical or…
Niobium is one of the most studied superconductors, both theoretically and experimentally. It is tremendously important for applications, and it has the highest superconducting transition temperature, $T_{c}=9.33$ K, of all pure metals. In…
A simplified numerical model has been developed to simulate non-linear superconducting radiofrequency (SRF) losses on Nb surfaces. This study focuses exclusively on excessive surface resistance (Rs) losses due to the microscopic…
Recently reported anomalies in frequency shift of order $\delta f\sim 0.1 -10\,\mbox{kHz}$ for Niobium SRF cavities in a narrow temperature region near $T_c\simeq 9\,\mbox{K}$ are sensitive to the surface preparation and Nitrogen doping. We…
Niobium is commonly used for superconducting quantum systems as readout resonators, capacitors, and interconnects. The coherence time of the superconducting qubits is mainly limited by microwave dissipation attributed to two-level system…
Nb3Sn superconducting radiofrequency (SRF) cavities have substantial potential for enabling new performance capabilities for particle accelerators for high energy physics (HEP), as well as for RF cavity-based detectors for dark matter,…
Evanescent wave amplification has been predicted under the ideal condition n = -1 + i 0 precisely, in the absence of retardation effects, but is difficult to observe in practice because current metamaterial designs suffer from high losses.…
We present an experimental characterisation of the electrical properties of 3D-printed Niobium. The study was performed by inserting a 3D-printed Nb post inside an Aluminium cylindrical cavity, forming a 3D lumped element re-entrant…
Advances in SRF technology over the last 40 years allowed achieving accelerating gradients ~ 50 MV/m corresponding to peak surface magnetic field close to the theoretical limit of niobium. However, the quality factor decreases significantly…