Related papers: Lithium fluoride (LiF) target preparation for nucl…
We have produced in the Nuclear Physics Center in Lisbon thin film self-supported targets of Ag, LiF/Ag and CaF$_2$/Ag by a high vacuum resistance evaporation method. The production setup, materials, methods, characterization and results…
The energy losses of ~(0.273-3.334) MeV protons in Lithium Fluoride thin films deposited by vacuum evaporation onto self-supporting Al foils have been measured using the transmission method. The thicknesses of selected and used Lithium…
A method is reported for measuring the thickness and uniformity of thin films of solidified gas targets. The energy of alpha particles traversing the film is measured and the energy loss is converted to thickness using the stopping power.…
The detailed process of preparing enriched $^{108}$Cd targets on mylar and copper backing using the vacuum evaporation technique is described. These targets were employed in an experiment to measure the proton capture cross-section at…
Here we report on spectroscopic measurements of the aluminum monofluoride molecule (AlF) that are relevant to laser cooling and trapping experiments. We measure the detailed energy level structure of AlF in the X$^1\Sigma^+$ electronic…
In this work, a simple and efficient thin ($50- 350\mu g/cm^2$) deuterated polyethylene target preparation method is described. The method of easy removal of thin targets from casting surface without using any cryogenic freezing has been…
Thin, uniform arsenic targets suitable for high-fidelity cross section measurements in stacked-target experiments were prepared by electrodeposition of arsenic on titanium backings from aqueous solutions. Electrolytic cells were constructed…
Given the unique optical properties of LiF, it is often used as an observation window in high-temperature and pressure experiments; and, hence, estimates of its transmission properties are necessary to interpret observations. Since direct…
The FRIB heavy-ion accelerator, commissioned in 2022, is a leading facility for producing rare isotope beams (RIBs) and exploring nuclei beyond the limits of stability. These RIBs are produced via reactions between stable primary beams and…
Lithium phosphorus oxynitride (LiPON) is a well-known amorphous thin film solid electrolyte that has been extensively studied in the last three decades. Despite the promises to pair with Li metal anode and various cathode materials, the…
We demonstrate and characterize a source of Li atoms made from direct metal laser sintered titanium. The source's outgassing rate is measured to be $5 \,(2)\cdot 10^{-7}$\,$\rm{Pa}~ \rm{L}~ \rm{s}^{-1}$ at a temperature $T=330\,^\circ$C,…
In atom probe tomography (APT), atoms from the surface of a needle shape specimen are evaporated under a high electric field and analyzed via time of flight mass spectrometry and position sensitive detection. 3D reconstruction of the atom…
The sensitivity of our liquid argon purity measurement -around 0.03%- leads us to refine the tools used classically in this field. First we introduce an analytical form describing the spectrum of a 207Bi source for different values of…
LiF:Mg,Ti and LiF:Mg,Cu,P are well known thermoluminescence (TL) dosimetry materials since many years. A few years ago their properties seemed well known and it was widely believed that they are not suitable for the measurement of doses…
The interaction of intense fs laser pulses with thin foils that have an imposed deformation is compared with thick targets that develop bow shocks. Both target types yield good absorption. Up to 80% absorption is obtained for a $0.2\mu m$…
Lithium fluoride (LiF) is a critical component for stabilizing lithium metal anode and high-voltage cathodes towards the next-generation high-energy-density lithium batteries. Recent modeling study reported the formation of wurtzite LiF…
The prospects of phosphorene as an anode material for high performance Li-ion battery was systematically investigated from the first principle calculations and experimental measurements. The diffusion energy barriers of a Li atom moving…
Estimations of evaporation field values in atom probe tomography (APT) literature are sparse despite their importance in the reconstruction and data analysis process. This work describes a straightforward method for estimating the…
Atom probe tomography (APT) analysis conditions play a major role in the composition measurement accuracy. Preferential evaporation, which significantly biases apparent composition, more than other well-known phenomena in APT, is strongly…
Resistive heating and mechanical rolling methods have been employed to prepare isotopically enriched thin target foils of 116Sn (~380 \mu g/cm2), 124Sn(~400 \mu g/cm2) and thicker foils of 112Sn (1.7 mg/cm2),120Sn (1.6 mg/cm2),respectively.…