Related papers: All-BN Distributed Bragg Reflectors Fabricated in …
Distributed Bragg reflectors (DBRs) are one of the basic photonic structures used to define microcavities for fundamental light-matter coupling studies, as well as to optimize performance of optoelectronic and photonic devices, e.g., lasers…
High-reflectance group III-nitride distributed Bragg reflectors (DBRs) were deposited by MOCVD on Si (111) substrates. A reflectance greater than 96% was demonstrated for the first time for an AlN/GaN DBR with a stop-band centered in the…
Strong interference in ultrathin film semiconductor absorbers on metallic back reflectors has been shown to enhance the light harvesting efficiency of solar cell materials. However, metallic back reflectors are not suitable for tandem cell…
Distributed bragg reflectors (DBRs) consisting of ZnO and amorphous silicon (a-Si) were prepared by magnetron sputtering method for selective light trapping. The quarter-wavelength ZnO/a-Si DBRs with only 6 periods exhibit a peak…
High-reflectivity mirrors in the mid-infrared (MIR) range are essential for next-generation optoelectronic devices but are still constrained by strain accumulation, poor thermal conductivity, and growth instability of thick multi-alloy…
Distributed Bragg reflectors (DBRs) composed of an AlN/AlGaN superlattice were grown of Si (111) substrates. The first high-reflectance III-nitride DBR on Si was achieved by growing the DBR directly on the Si substrate to enhance the…
Fabrication of porous GaN distributed Bragg reflectors (DBRs) via the selective electrochemical etching (ECE) of conductive Si-doped layers, separated by non-intentionally doped (NID) layers, provides a straightforward methodology for…
This paper presents the development of a superconducting nanowire single-photon detector (SNSPD) integrated into a distributed Bragg reflector (DBR) with a design center wavelength of 830 nm and a width of 200 nm. This SNSPD is made of a…
One-dimensional (1D) polymer-based photonic crystals (PhCs) in the $1.55~\mu{}m$ wavelength range can be easily created using a two-photon direct laser writing system. To achieve shorter period structures, we report the use of thermal…
The combination of grating-based frequency-selective optical feedback mechanisms, such as distributed feedback (DFB) or distributed Bragg reflector (DBR) structures, with quantum dot (QD) gain materials is a main approach towards…
Hexagonal boron nitride (hBN) is a layered dielectric material with a wide range of applications in optics and photonics. In this work, we demonstrate a fabrication method for few-layer hBN flakes with areas up to 5000 $\rm \mu m$. We show…
Distributed Bragg reflectors (DBRs) can be fabricated by electrochemically etching nitride epitaxial structures consisting of alternating layers of highly n-type doped and non-intentionally doped (NID) GaN. Threading dislocations (TDs) can…
The Bragg regime shifts when conventional materials in a multilayer distributed Bragg reflector (DBR) are replaced by artificial materials with the so-called negative index of refraction. This provides an avenue for characterizing the…
We demonstrate a new approach to integrate single layer MoSeR2R and WSeR2R flakes into monolithic all-dielectric planar high-quality micro-cavities. These distributed-Bragg-reflector (DBR) cavities may e.g. be tuned to match the exciton…
Highly reflective mirrors are indispensable components in a variety of state-of-the-art photonic devices. Typically used, bulky, multi-layered distributed Bragg (DBR) reflectors are limited to lattice-matched semiconductors or nonconductive…
High quality 940 nm Al$_x$Ga$_{1-x}$As n-type distributed Bragg reflectors (DBRs) were successfully monolithically grown on off-cut Ge (100) substrates. The Ge-DBRs have reflectivity spectra comparable to those grown on conventional bulk…
A hybrid computational method of plane-wave and cylindrical-wave expansions for distributed Bragg-reflector (DBR) pillars is proposed. The plane-wave expansion is employed to represent the one-dimensional periodic structure of the DBR. The…
We report the fabrication of monolithically integrated 940 nm AlGaAs distributed Bragg reflectors (DBRs) on graded GaAsP/Si substrates. Low-density surface bumps and cross-hatch patterns were observed on the DBR surfaces. Cross-sectional…
Bragg-reflection waveguides (BRWs) fabricated from AlGaAs provide an interesting non-linear optical platform for photon-pair generation via parametric down-conversion (PDC). In contrast to many conventional PDC sources, BRWs are made of…
We report the design, nanofabrication, and characterization of high-quality polymer-based micromirror structures employing the 3D two-photon polymerization lithography technique. Compared to conventional microcavity approaches, our…