Related papers: Microsecond non-melt UV laser annealing for future…
Ultraviolet (UV) imagers are important for a variety of applications, such as quality inspection in the semiconductor industry, forensics and food quality inspection, but are often costly because they require dedicated semiconductor process…
We report large-mode-area solid-core photonic crystal fibers made from fused silica that resist ultraviolet (UV) solarization even at relatively high optical powers. Using a process of hydrogen loading and UV irradiation of the fibers, we…
Laser micro-welding is an advanced manufacturing method today applied in various domains. However, important physical limitations have prevented so far to demonstrate its applicability in silicon and other technology-essential…
A key component for optical on-chip communication is an efficient light source. However, to enable low energy per bit communication and local integration with Si CMOS, devices need to be further scaled down. In this work, we fabricate…
Recently, liquid-phase crystallization of thin silicon films has emerged as a promising candidate for thin-film photovoltaics. On 10 \mu m thin absorbers, wafer-equivalent morphologies and open-circuit voltages were reached, leading to a…
We report on a reliable laser system for cooling magnesium atoms in the metastable 3P manifold. The three relevant transitions coupling the 3P to the 3D manifold are near 383 nm and seperated by several hundred GHz. The laser system…
Microlaser with multiple lasing bands is critical in various applications, such as full-colour display, optical communications and computing. Here, we propose a simple and efficient method for homogeneously doping rare earth elements into a…
Ultraviolet-C light-emitting diodes (UVC-LEDs) have great application in pathogen inactivation under various kinds of situations, especially in the fight against the COVID-19. Unfortunately, its epitaxial wafers are so far limited to 2-inch…
The direct growth of III-V materials on silicon is a key enabler for developing monolithically integrated lasers, offering substantial potential for ultra-dense photonic integration in vital communications and computing technologies.…
The LHC is expected to reach luminosities up to 3000fb-1 and the innermost layer of the ATLAS upgrade plans to cope with higher occupancy and to decrease the pixel size. 3D-Si sensors are a good candidate for the innermost layer of the…
We report the development of magnetic nanocomposite sheets with superhydrophobic and superoleophilic surfaces generated by laser ablation. Polydimethylsiloxane elastomer freestanding films, loaded homogeneously with 2% wt. carbon coated…
In this research, semiconductor-metallic hybrid nano-disk laser based on InGaAsP multi quantum wells (MQWs) or InGaAs bulk material membranes were designed, fabricated and characterized. The quality factors of surface-plasmon-polariton…
Silicon nitride (Si3N4), as a complementary metal-oxide-semiconductor (CMOS) material, finds wide use in modern integrated circuit (IC) technology. The past decade has witnessed tremendous development of Si3N4 in photonic areas, with…
The design and fabrication of a metal-dielectric-metal absorber that achieves strong absorption from the ultraviolet (UV) to the near-infrared (near-IR) spectrum are presented. The proposed nanostructure consists of a periodic titanium (Ti)…
We report on fabrication of whispering-gallery-mode microlasers in a Nd:glass chip by femtosecond laser three-dimensional (3D) micromachining. Main fabrication procedures include the fabrication of freestanding microdisks supported by thin…
We demonstrate a compact technique to compress electron pulses to attosecond length, while keeping the energy spread reasonably small. The technique is based on Dielectric Laser Acceleration (DLA) in nanophotonic silicon structures. Unlike…
Chalcogen-hyperdoped silicon shows potential applications in silicon-based infrared photodetectors and intermediate band solar cells. Due to the low solid solubility limits of chalcogen elements in silicon, these materials were previously…
In this study, we developed a UV-tape-assisted laser patterning (UT-Laser) technique that enables the simple transfer-based formation of wiring with line widths below 200 $\mu$m onto textile substrates. With the rapid advancement of…
Successive ionic layer adsorption and reaction (SILAR) method is based on the adsorption and reaction of the ions in the cationic solution and the ionic solution, respectively. This method is simple, inexpensive, large-scale deposition,…
Silicon photonics, compatible with large-scale silicon manufacturing, is a disruptive photonic platform that has indicated significant implications in industry and research areas (e.g., quantum, neuromorphic computing, LiDAR). Cutting-edge…