Related papers: Thinned Germanium Substrates for III-V Multijuncti…
Structural defects, particularly grain boundaries, play a crucial role in governing charge transport and the optoelectronic properties of metal halide perovskites, thereby limiting the performance of devices. Solar cells incorporating…
We present a comparative study of the optical and material property dependences of VCSELs on Ge or GaAs substrate thicknesses and epitaxy process conditions. It was found that adjusting the Ge substrate thickness and optimizing the epitaxy…
The orthorhombic crystal structure of the MgSnN$_2$ compound with Pna2$_1$ symmetry has been investigated as a low-cost, non-toxic material for photovoltaic (PV) applications using density functional theory (DFT) and spectroscopic limited…
We report on a monotonic reduction of Curie temperature in dilute ferromagnetic semiconductor (Ga,Mn)As upon a well controlled chemical-etching/oxidizing thinning from 15 nm down to complete removal of the ferro- magnetic response. The…
Among various types of perovskite-based tandem solar cells (TSCs), all-perovskite TSCs are of particular attractiveness for building- and vehicle-integrated photovoltaics, or space energy areas as they can be fabricated on flexible and…
Polymer solar cells are considered as very promising candidates for development of photovoltaics of the future. They are cheap and easy to fabricate, however, up to now, they possess fundamental drawback, low effectiveness. In the most…
Germanium (Ge) is increasingly used as a substrate for high-performance optoelectronic, photovoltaic, and electronic devices. These devices are usually grown on thick and rigid Ge substrates manufactured by classical wafering techniques.…
Two-dimensional (2D) Dirac materials have attracted intense research efforts due to their promise for applications ranging from field-effect transistors and low-power electronics to fault-tolerant quantum computation. One key challenge is…
Many tissues take the form of thin sheets, being only a single cell thick, but millions of cells wide. These tissue sheets can bend and buckle in the third dimension. In this work, we investigated the growth and shrinkage of suspended and…
Germanosilicide thin films are quite different from silicides and germanides. The germanium composition is not homogeneous, grains have a different shape, and the substrate is generally strained. This affects grain boundary grooving and…
We report the influence of the AlN interlayer thickness (0-15 nm) on the photovoltaic properties of Al0.37In0.63N on Si heterojunction solar cells deposited by radio frequency sputtering. The poor junction band alignment and the presence of…
III-V semiconductor-based photoelectrochemical (PEC) devices show the highest solar-to-electricity or solar-to-fuel conversion efficiencies. GaInP is a relevant top photoabsorber layer or a charge-selective contact in PEC for integrated and…
Using a gold (111) surface as a substrate we have grown in situ by molecular beam epitaxy an atom-thin, ordered, two-dimensional multi-phase film. Its growth bears strong similarity with the formation of silicene layers on silver (111)…
We demonstrate a non-destructive approach to provide structural properties on the grain level for the absorber layer of kesterite solar cells. Kesterite solar cells are notoriously difficult to characterize structurally due to the…
Dye-sensitized solar cells (DSC), built upon organic/inorganic hybrid materials, are promising third generation solar cells, which attract wide attentions due to their low-cost, flexibility and environment-friendly properties. We review…
The epitaxial growth conditions for silicon on germanium substrates were investigated as a function of growth temperature and monolayer coverage. Island formation was observed for the hole studied temperature range, although strong alloying…
We quantify the mechanisms for manganese (Mn) diffusion through graphene in Mn/graphene/Ge (001) and Mn/graphene/GaAs (001) heterostructures for samples prepared by graphene layer transfer versus graphene growth directly on the…
The majority of silicon photonics is built on silicon-on-insulator (SOI) wafers while the majority of electronics, including CPUs and memory, are built on bulk silicon wafers, limiting broader acceptance of silicon photonics. This…
The visibility of graphene sheets on different types of substrates has been investigated both theoretically and experimentally. Although single layer graphene is observable on various types of dielectrics under an optical microscope, it is…
GeSn has emerged as a promising semiconductor with optoelectronic functionality in the mid-infrared, with the potential of replacing expensive III-V technology for monolithic on-chip Si photonics. Multiple challenges to achieve…