Related papers: Metastable defects decrease the fill factor of sol…
In terms of mixing graded TiO2 and SnO2 powders by solid-state reaction method, ITO was prepared. Using electron beam gun technology, ITO films with different thicknesses were prepared. The influence of film thickness on structure,…
Realizing basic semiconductor devices such as p-n junctions are necessary for developing thin-film and optoelectronic technologies in emerging planar materials such as MoS2. In this work, electrostatic doping by buried gates is used to…
An optoelectronic optimization was carried out for an AlGaAs solar cell containing (i) an n-AlGaAs absorber layer with a graded bandgap and (ii) a periodically corrugated Ag backreflector combined with localized ohmic Pd-Ge-Au backcontacts.…
Ever science the invention of solar cells, thermodynamics has been used to assess their performance limits, guiding advances in materials science and photovoltaic technology to reduce the gap between the practical efficiencies and the…
As emphasized in a recent review article [Chem. Rev. 122, 14180 (2022)], organic solar cell (OSC) photoconversion efficiency has been rapidly evolving with results increasingly comparable to those of traditional inorganic solar cells.…
Received: 1st December 2018; Accepted: 18th February 2019; Published: 1st April 2019 Abstract: The calculated filling factors (FFs) for a feature reflect the fraction of the solar disc covered by that feature, and the assignment of…
Lattice defects and interfacial absorbates represent two extrinsic but ubiquitous factors that exert profound impacts on the luminescent properties of semiconductors. However, their impacts are normally tangled and remain to be separately…
We calculate the maximal absorption enhancement obtainable by guided mode excitation in a weakly absorbing dielectric slab over wide wavelength ranges. The slab mimics thin film silicon solar cells in the low absorption regime. We consider…
A solar cell design using the combination of titanium dioxide and graphite as active photon absorbing materials were proposed. The titanium dioxide absorbs photons of nearly ultraviolet wavelengths to produce electron hole pairs, while…
The increase of cell efficiency resulting from using a diffraction grating as a back reflector is investigated. An enhancement coefficient is introduced as a figure of merit that accounts for the ability of the rear grating to increase the…
The rigorous coupled-wave approach (RCWA) and the differential evolution algorithm (DEA) were coupled in a practicable approach to maximize absorption in optical structures with three-dimensional morphology. As a model problem, optimal…
We theoretically explore the effect of metal and disulphur vacancies on electronic and optical properties of MoS$_2$ and WS$_2$ monolayers based on a Slater-Koster tight-binding model and including the spin-orbit coupling. We show that the…
Sulfide Kesterite Cu2ZnSnS4 (CZTS), a nontoxic and low-cost photovoltaic material, has always being facing severe charge recombination and poor carrier transport, resulting in the cell efficiency record stagnating around 11% for years.…
Absorbed sunlight in a solar cell produces electrons and holes. But, at the open circuit condition, the carriers have no place to go. They build up in density and, ideally, they emit external fluorescence that exactly balances the incoming…
Antimony selenide (Sb2Se3) is at the forefront of an emerging class of sustainable photovoltaic materials. Despite notable developments over the past decade, the light-to-electricity conversion efficiency of Sb2Se3 has reached a plateau of…
Strong saturated absorption at nanowatt power levels has been demonstrated using metastable xenon in a high-finesse optical cavity. The use of metastable xenon allows a high quality factor of Q=2*10^8 to be achieved at relatively high…
One effective way to prevent toxicity and improve the stability of materials for photovoltaic applications is to exclude lead and organic molecules from perovskite materials. Specifically, the CsSn1-xGexI3 appears to be a promising…
Solar cells based on conventional semiconductors have low efficiency in converting solar energy into electricity because the excess energy beyond the gap of an incident solar photon is converted into heat by phonons. Here we show by ab…
To be able to increase the efficiency of perovskite solar cells which is one of the most substantial challenges ahead in photovoltaic industry, the structural and optical properties of perovskite CH3NH3PbI3-xBrx for values x=1-3 have been…
Recent progress in nanoscale optical physics is associated with the development of a new branch of nanophotonics exploring strong Mie resonances in dielectric nanoparticles with high refractive index. The high-index resonant dielectric…