Related papers: Unraveling the stable cathode electrolyte interfac…
The solid electrolyte interphase (SEI) is regarded as the most complex but the least understood constituent in secondary batteries using liquid and solid electrolytes. The nanostructures of SEIs were recently reported to be equally…
Oxidative decomposition of organic-solvent-based liquid electrolytes at cathode material interfaces has been identified as a main reason for rapid capacity fade in high-voltage lithium ion batteries. The evolution of "cathode electrolyte…
Li-CO$_2$ batteries are promising energy storage systems due to their high theoretical energy density and CO$_2$ fixation capability, relying on reversible Li$_2$CO$_3$/C formation during discharge/charge cycles. We present a multiscale…
A new superstructure of layered pristine LiNiO2 (LNO) was obtained optimizing a large supercell of the 166 space group, the one observed experimentally by XRD, and relaxing both cell parameters and internal positions. The crystal structure…
Battery electrode surfaces are generally coated with electronically insulating solid films of thickness 1-50 nm. Both electrons and Li+ can move at the electrode-surface film interface in response to the voltage, which adds complexity to…
Understanding degradation processes in lithium ion batteries is essential for improving long term performance and advancing sustainable energy technologies. Tin selenide (SnSe) has emerged as a promising anode material due to the high…
Polymer electrolytes present a promising solution to the challenges posed by aqueous electrolytes in energy storage systems, offering the flexibility needed for wearable electronics. Despite the increasing interest in polymer…
The biggest challenge for the commercialization of layered structured nickel rich lithium transition metal oxide cathode is the capacity and voltage fading. Resolving this problem over the years follows an incremental progress. In this…
A full lithium-ion-sulfur cell with a remarkable cycle life was achieved by combining an environmentally sustainable biomass-derived sulfur-carbon cathode and a pre-lithiated silicon oxide anode. X-ray diffraction, Raman spectroscopy,…
Lithium-metal batteries employing concentrated glyme-based electrolytes and different cathode chemistries are herein evaluated in view of a safe use of the highly energetic alkali-metal anode. Indeed, diethylene-glycol dimethyl-ether…
We propose fabrication of the fiber-shaped lithium ion batteries assembled by twisting a cathode filament together with an anode filament. The cathode filament is fabricated by depositing a LiFePO4 (LFP)-composite layer onto a steel-filled…
Lithium phosphorus oxynitride (LiPON) is an amorphous solid-state lithium ion conductor displaying exemplary cyclability against lithium metal anodes. There is no definitive explanation for this stability due to the limited understanding of…
Aqueous rechargeable batteries are promising energy storage devices for the high safety, environmental friendliness, and easy assembly. However, their cycle stability and low temperature performance are limited by the narrow electrochemical…
Lithium titanium oxide Li$_4$Ti$_5$O$_{12}$ (LTO) is an intriguing anode material promising particularly long lived batteries, due to its remarkable phase stability during (dis)charging of the cell. However, its usage is limited by its low…
The incorporation of ceramics into polymers, forming solid composite electrolytes (SCEs) leads to enhanced electrical performance of all-solid-state lithium metal batteries. This is because the dispersed ceramics particles increase the…
Composite materials achieved by including transition-metal oxides with different structures and morphologies in sulfur are suggested as scalable cathodes for high-energy lithium-sulfur (Li-S) batteries. The composites contain 80 wt.% sulfur…
We demonstrate that for polycrystalline LiNi0.33Mn0.33Co0.33O2 c-axis textured thin film cathodes of rechargeable lithium-ion batteries, the kinetics of Li storage and release including maximum specific capacity is determined by Li…
There is increasing interest in materials that combine energy-storing functions with augmented mechanical properties, ranging from flexibility in bending to stretchability to structural properties. In the case of lithium-ion batteries,…
High-performance anodes for rechargeable Li-ion battery are produced by nanostructuring of the transition metal oxides on a conductive support. Here, we demonstrate a hybrid material of MnO2 directly grown onto fabrics of carbon nanotube…
In recent years there has been a major interest in developing all solid state batteries, for the sake of safety (issues due to toxic and flammable organic liquid electrolytes are well known) as well as of high energy density…