Related papers: High Efficiency, Low Cost, RF Sources for Accelera…
One of the fundamental challenges for future leptonic colliders and neutrino factories as well as for high-sensitivity studies of lepton universality is to design and construct new high-intensity sources of muons and positrons. The…
The ISIS synchrotron at the Rutherford Appleton Laboratory in the UK now routinely uses a dual harmonic RF system to accelerate beam currents in excess of 230uA to run two target stations simultaneously. The acceleration in the ISIS…
The magnetic field control subsystem of the Nuclotron - a superferric ion synchrotron - is described. The bending (BM), focusing (QF) and defocusing (QD) magnets are powered by three supplies. The BMs are driven by the supply of a 6.3 kA…
A model of the CW high-power transmitter, utilizing frequency-locked magnetrons with a phase control studied initially as a prototype of controllable in phase and power an RF source for intensity-frontier superconducting linacs, was…
We detail the design of a variable energy, x-ray fluorescence source using a low activity (1.8$\times10^6$~dpm) \nuc{99}{Tc} $\beta$ source that irradiates thin foils. By rotating the source among foils of Ti, Zn, Nb, Ag, and Au, the device…
A high-efficiency power-combining method for four-way 5.8-GHz magnetrons based on the external injection-locking technique is presented in this article. The method uses a nonisolated, lossless five-port hybrid waveguide combiner for power…
Advances in power electronics have made it possible to achieve high power levels, e.g., reaching GW in grids, or alternatively high output bandwidths, e.g., beyond MHz in communication. Achieving both simultaneously, however, remains…
High-power electron beams are sought-after tools in support to a wide array of societal applications. This paper investigates the production of high-power electron beams by combining a high-current field-emission electron source to a…
As the main $H^{-}$ ion source for the accelerator complex, magnetron ion sources have been used at Fermilab since the 1970s. At the offline test stand, new R&D is carried out to develop and upgrade the present magnetron-type sources of…
A concept of a high-power magnetron transmitter for operation within a wideband control feedback loop in phase and amplitude is presented. This transmitter is proposed to drive Superconducting RF (SRF) cavities for intensity-frontier…
In this paper, we review and compare HPM sources operating without a magnetic field to guide the electron beam that are capable of producing high-power microwave (HPM) pulses with a duration of about 100 ns. The proposed analysis summarizes…
The millimeter wave all-metallic accelerating structure, aimed to provide more than 100 MeV/m gradient and fed by feeding RF pulses of 20-30 ns duration, is proposed. The structure is based on a waveguide with small helical corrugation.…
This study aims to develop a cost-effective microgrid design that optimally balances the economic feasibility, reliability, efficiency, and environmental impact in a grid-tied community microgrid. A multi-objective optimization framework is…
We present the technical and engineering design of a medium energy (10 MeV) and high average power (1 MW) electron beam accelerator intended for irradiation treatment of high volume industrial and municipal wastewater. The accelerator uses…
Optical frequency combs play a crucial role in optical communications, time-frequency metrology, precise ranging, and sensing. Among various generation schemes, resonant electro-optic combs are particularly attractive for its excellent…
A low cost solution for constructing receiver signal points is investigated that combines a large number of constrained radio frequency (RF) frontends with a limited number of full RF chains. The constrained RF front ends have low cost and…
Future wireless cellular networks will utilize millimeter-wave and sub-THz frequencies and deploy small-cell base stations to achieve data rates on the order of hundreds of Gigabits per second per user. The move to sub-THz frequencies will…
The China initiative Accelerator Driven System, CiADS, physics design adopts $162.5 \,\mathrm{MHz}$, $325 \,\mathrm{MHz}$, and $650 \,\mathrm{MHz}$ cavities, which are driven by the corresponding radio frequency (RF) power system, requiring…
Optical frequency comb synthesizers (FCs) [1] are laser sources covering a broad spectral range with a number of discrete, equally spaced and highly coherent frequency components, fully controlled through only two parameters: the frequency…
The concept of large-radius multistage coaxial cyclotrons having separated orbits is described, to generate proton beams of 120-2000 MeV energy at tens of GW pulsed and hundreds of MW in continuous beam power operation. Accelerated beam…